添加代码生成样本;
- 光伏逆变器 - 参数管理模块
This commit is contained in:
何 泽隆
264
test/PV_Inverter/arm/mw_param_manager_arm_struct.c
Normal file
264
test/PV_Inverter/arm/mw_param_manager_arm_struct.c
Normal file
@@ -0,0 +1,264 @@
|
||||
#include <limits.h>
|
||||
#include "project.h"
|
||||
#include "mw_param_manager_arm_struct.h"
|
||||
|
||||
|
||||
|
||||
|
||||
const modbus_param_value_info_t s_ast_param_range[MAX_VALID_PARAM_ADDRESS + 1] =
|
||||
{
|
||||
/*address, datatype, default_value, min_value, max_value*/
|
||||
{0, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{1, DATATYPE_UINT16_T, 0, 0, 65535, }, /*设备MES码*/
|
||||
{2, DATATYPE_UINT16_T, 0, 0, 65535, }, /*设备MES码*/
|
||||
{3, DATATYPE_UINT16_T, 0, 0, 65535, }, /*设备MES码*/
|
||||
{4, DATATYPE_UINT16_T, 0, 0, 65535, }, /*设备MES码*/
|
||||
{5, DATATYPE_UINT16_T, 0, 0, 65535, }, /*12位出厂编号*/
|
||||
{6, DATATYPE_UINT16_T, 0, 0, 65535, }, /*12位出厂编号*/
|
||||
{7, DATATYPE_UINT16_T, 1, 0, 65535, }, /*12位出厂编号*/
|
||||
{8, DATATYPE_UINT16_T, 0, 0, 65535, }, /*板级生产检测结果*/
|
||||
{9, DATATYPE_UINT16_T, 0, 0, 1, }, /*工厂整机测试结果*/
|
||||
{10, DATATYPE_UINT16_T, 0, 0, 65535, }, /*硬件组件号*/
|
||||
{11, DATATYPE_UINT16_T, 0, 0, 65535, }, /*硬件组件号*/
|
||||
{12, DATATYPE_UINT16_T, 0, 0, 65535, }, /*硬件组件号*/
|
||||
{13, DATATYPE_UINT16_T, 0, 0, 65535, }, /*行政区域码*/
|
||||
{14, DATATYPE_UINT16_T, 0, 0, 65535, }, /*终端地址*/
|
||||
{15, DATATYPE_UINT16_T, 0, 0, 3, }, /*对外串口波特率*/
|
||||
{16, DATATYPE_UINT16_T, 0, 0, 1, }, /*载波协议类型*/
|
||||
{17, DATATYPE_UINT16_T, 0, 0, 1, }, /*645协议版本*/
|
||||
{18, DATATYPE_UINT16_T, 0, 0, 65535, }, /*0级密码*/
|
||||
{19, DATATYPE_UINT16_T, 0, 0, 65535, }, /*0级密码*/
|
||||
{20, DATATYPE_UINT16_T, 0, 0, 65535, }, /*1级密码*/
|
||||
{21, DATATYPE_UINT16_T, 0, 0, 65535, }, /*1级密码*/
|
||||
{22, DATATYPE_UINT16_T, 0, 0, 65535, }, /*2级密码*/
|
||||
{23, DATATYPE_UINT16_T, 0, 0, 65535, }, /*2级密码*/
|
||||
{24, DATATYPE_UINT16_T, 0, 0, 65535, }, /*户号*/
|
||||
{25, DATATYPE_UINT16_T, 0, 0, 65535, }, /*户号*/
|
||||
{26, DATATYPE_UINT16_T, 0, 0, 65535, }, /*户号*/
|
||||
{27, DATATYPE_UINT16_T, 0, 0, 65535, }, /*虚拟电厂编号*/
|
||||
{28, DATATYPE_UINT16_T, 0, 0, 65535, }, /*虚拟电厂编号*/
|
||||
{29, DATATYPE_UINT16_T, 0, 0, 65535, }, /*虚拟电厂编号*/
|
||||
{30, DATATYPE_UINT16_T, 2028, 1800, 2200, }, /*漏电流直流偏置AD值*/
|
||||
{31, DATATYPE_UINT16_T, 6250, 1, 65535, }, /*漏电流校准系数*/
|
||||
{32, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{33, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{34, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{35, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{36, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{37, DATATYPE_UINT16_T, 0, 0, 65535, }, /*国网地址*/
|
||||
{38, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
{39, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
{40, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
{41, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
{42, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
{43, DATATYPE_UINT16_T, 0, 0, 65535, }, /*表号（ESAM用）*/
|
||||
#if defined(PV_INV30)
|
||||
{44, DATATYPE_UINT16_T, 50, 0, 300, }, /*漏电流内部参考值*/
|
||||
#elif defined(PV_INV40)
|
||||
{44, DATATYPE_UINT16_T, 65, 0, 300, }, /*漏电流内部参考值*/
|
||||
#elif defined(PV_INV50)
|
||||
{44, DATATYPE_UINT16_T, 65, 0, 300, }, /*漏电流内部参考值*/
|
||||
#else
|
||||
{44, DATATYPE_UINT16_T, 0, 0, 0 }, /*漏电流内部参考值*/
|
||||
#endif
|
||||
{45, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{46, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{47, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{48, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{49, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{50, DATATYPE_UINT16_T, 0, 0, 1, }, /*设备开机*/
|
||||
{51, DATATYPE_UINT16_T, 0, 0, 1, }, /*设备关机*/
|
||||
{52, DATATYPE_UINT16_T, 0, 0, 1, }, /*故障复位*/
|
||||
{53, DATATYPE_UINT16_T, 0, 0, 1, }, /*解锁特殊操作*/
|
||||
{54, DATATYPE_UINT16_T, 0, 0, 1, }, /*设备重启*/
|
||||
{55, DATATYPE_UINT16_T, 0, 0, 1, }, /*功率单元自检(调试)*/
|
||||
{56, DATATYPE_UINT16_T, 0, 0, 1, }, /*功率单元重启*/
|
||||
{57, DATATYPE_UINT16_T, 0, 0, 1, }, /*功率单元强制复位*/
|
||||
{58, DATATYPE_UINT16_T, 0, 0, 1, }, /*参数还原*/
|
||||
{59, DATATYPE_UINT16_T, 0, 0, 1, }, /*复位4G*/
|
||||
{60, DATATYPE_UINT16_T, 0, 0, 1, }, /*直流载波复位*/
|
||||
{61, DATATYPE_UINT16_T, 0, 0, 1, }, /*交流载波复位*/
|
||||
{62, DATATYPE_UINT16_T, 0, 0, 1, }, /*手动录波*/
|
||||
{63, DATATYPE_UINT16_T, 0, 0, 1, }, /*所有记录数据擦除*/
|
||||
{64, DATATYPE_UINT16_T, 0, 0, 1, }, /*录波擦除*/
|
||||
{65, DATATYPE_UINT16_T, 0, 0, 1, }, /*事件擦除*/
|
||||
{66, DATATYPE_UINT16_T, 0, 0, 1, }, /*日志记录擦除*/
|
||||
{67, DATATYPE_UINT16_T, 0, 0, 1, }, /*分钟冻结数据擦除*/
|
||||
{68, DATATYPE_UINT16_T, 0, 0, 1, }, /*日冻结数据擦除*/
|
||||
{69, DATATYPE_UINT16_T, 0, 0, 1, }, /*月冻结数据擦除*/
|
||||
{70, DATATYPE_UINT16_T, 0, 0, 1, }, /*年冻结数据擦除*/
|
||||
{71, DATATYPE_UINT16_T, 0, 0, 1, }, /*报文记录数据擦除*/
|
||||
{72, DATATYPE_UINT16_T, 0, 0, 1, }, /*操作记录数据擦除*/
|
||||
{73, DATATYPE_UINT16_T, 0, 0, 1, }, /*电量记录数据擦除*/
|
||||
{74, DATATYPE_UINT16_T, 0, 0, 1, }, /*打印开关*/
|
||||
{75, DATATYPE_UINT16_T, 0, 0, 1, }, /*漏电流校准直流量(按钮)*/
|
||||
{76, DATATYPE_UINT16_T, 0, 0, 1, }, /*漏电流校准系数(按钮)*/
|
||||
{77, DATATYPE_UINT16_T, 0, 0, 1, }, /*漏电流自检(按钮)*/
|
||||
{78, DATATYPE_UINT16_T, 0, 0, 1, }, /*恢复出厂设置*/
|
||||
{79, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{80, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{81, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{82, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{83, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{84, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{85, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{86, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{87, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{88, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{89, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{90, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{91, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{92, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{93, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{94, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{95, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{96, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{97, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{98, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{99, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{100, DATATYPE_UINT16_T, 0, 0, 2, }, /*工作模式*/
|
||||
{101, DATATYPE_UINT16_T, 0, 0, 1, }, /*补偿模式选择*/
|
||||
{102, DATATYPE_UINT16_T, 0, 0, 1, }, /*开机模式*/
|
||||
{103, DATATYPE_UINT16_T, 15, 0, 3600, }, /*自动开机延时*/
|
||||
{104, DATATYPE_UINT16_T, 0, 0, 1, }, /*定时开关机使能*/
|
||||
{105, DATATYPE_UINT16_T, 0, 0, 23, }, /*定时开机时间*/
|
||||
{106, DATATYPE_UINT16_T, 0, 0, 59, }, /*定时开机时间*/
|
||||
{107, DATATYPE_UINT16_T, 0, 0, 59, }, /*定时开机时间*/
|
||||
{108, DATATYPE_UINT16_T, 0, 0, 23, }, /*定时关机时间*/
|
||||
{109, DATATYPE_UINT16_T, 0, 0, 59, }, /*定时关机时间*/
|
||||
{110, DATATYPE_UINT16_T, 0, 0, 59, }, /*定时关机时间*/
|
||||
{111, DATATYPE_UINT16_T, 300, 0, 65535, }, /*低功耗判断延时*/
|
||||
{112, DATATYPE_UINT16_T, 10, 0, 65535, }, /*退出低功耗判断延时*/
|
||||
{113, DATATYPE_UINT16_T, 180, 0, 65535, }, /*自动复位延时*/
|
||||
{114, DATATYPE_UINT16_T, 0, 0, 65535, }, /*DSP看门狗复位使能*/
|
||||
{115, DATATYPE_UINT16_T, 5, 1, 15, }, /*分钟冻结周期*/
|
||||
{116, DATATYPE_UINT16_T, 0, 0, 3, }, /*报文记录使能*/
|
||||
{117, DATATYPE_UINT16_T, 0, 0, 2, }, /*报文记录方向*/
|
||||
{118, DATATYPE_UINT16_T, 0, 0, 11, }, /*报文记录端口*/
|
||||
{119, DATATYPE_UINT16_T, 0, 0, 1, }, /*错误打印记录使能*/
|
||||
{120, DATATYPE_UINT16_T, 1, 0, 1, }, /*绝缘阻值检测使能*/
|
||||
{121, DATATYPE_UINT16_T, 0, 0, 1, }, /*风扇控制模式*/
|
||||
{122, DATATYPE_UINT16_T, 3, 0, 3, }, /*漏电流模式*/
|
||||
{123, DATATYPE_UINT16_T, 20, 0, 65535, }, /*放电起始功率*/
|
||||
{124, DATATYPE_UINT16_T, 0, 0, 1, }, /*抗PID使能*/
|
||||
{125, DATATYPE_UINT16_T, 120, 30, 1200, }, /*抗PID启动时间*/
|
||||
{126, DATATYPE_UINT16_T, 15, 0, 15, }, /*自动清除故障模式*/
|
||||
{127, DATATYPE_UINT16_T, 0, 0, 1, }, /*交流载波使能*/
|
||||
{128, DATATYPE_UINT16_T, 0, 0, 1, }, /*逆变器控制使能*/
|
||||
{129, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{130, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{131, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{132, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{133, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{134, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{135, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{136, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{137, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{138, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{139, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{140, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{141, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{142, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{143, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{144, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{145, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{146, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{147, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{148, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{149, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{150, DATATYPE_UINT16_T, 37851, 0, 65535, }, /*主站IP*/
|
||||
{151, DATATYPE_UINT16_T, 15898, 0, 65535, }, /*主站IP*/
|
||||
{152, DATATYPE_UINT16_T, 5223, 0, 65535, }, /*主站端口号*/
|
||||
{153, DATATYPE_UINT16_T, 10, 0, 65535, }, /*4G交互周期*/
|
||||
{154, DATATYPE_UINT16_T, 600, 0, 65535, }, /*4G通信超时阈值*/
|
||||
{155, DATATYPE_UINT16_T, 0, 0, 1, }, /*CAN使能*/
|
||||
{156, DATATYPE_UINT16_T, 0, 0, 5, }, /*CAN并机ID*/
|
||||
{157, DATATYPE_UINT16_T, 0, 0, 5, }, /*CAN并机数量*/
|
||||
{158, DATATYPE_UINT16_T, 180, 0, 3600, }, /*通信故障判定时间*/
|
||||
{159, DATATYPE_UINT16_T, 1440, 1, 65535, }, /*载波通信超时判断周期*/
|
||||
{160, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{161, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{162, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{163, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{164, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{165, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{166, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{167, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{168, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{169, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{170, DATATYPE_UINT16_T, 0, 0, 2, }, /*风扇自动控制因素*/
|
||||
{171, DATATYPE_UINT16_T, 95, 0, 100, }, /*手动风扇占空比*/
|
||||
{172, DATATYPE_UINT16_T, 35, 10, 50, }, /*风扇启动占空比*/
|
||||
{173, DATATYPE_UINT16_T, 100, 51, 100, }, /*风扇最大占空比*/
|
||||
{174, DATATYPE_UINT16_T, 45, 10, 150, }, /*风扇启动温度*/
|
||||
{175, DATATYPE_UINT16_T, 55, 30, 150, }, /*风扇满速温度*/
|
||||
{176, DATATYPE_UINT16_T, 33, 0, 100, }, /*风扇启动功率(额定值%)*/
|
||||
{177, DATATYPE_UINT16_T, 67, 0, 100, }, /*风扇满速功率(额定值%)*/
|
||||
{178, DATATYPE_UINT16_T, 42016, 1, 65535, }, /*幅值参考预留1*/
|
||||
{179, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留2*/
|
||||
{180, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留3*/
|
||||
{181, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留4*/
|
||||
{182, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留5*/
|
||||
{183, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留6*/
|
||||
{184, DATATYPE_UINT16_T, 0, 0, 65535, }, /*幅值参考预留7*/
|
||||
{185, DATATYPE_UINT16_T, 180, 0, 65535, }, /*绝缘阻值故障阈值*/
|
||||
{186, DATATYPE_UINT16_T, 1500, 0, 65535, }, /*绝缘检测闭合时间*/
|
||||
{187, DATATYPE_UINT16_T, 5000, 0, 65535, }, /*绝缘检测断开时间*/
|
||||
{188, DATATYPE_UINT16_T, 2000, 0, 65535, }, /*风扇故障转速阈值*/
|
||||
{189, DATATYPE_UINT16_T, 200, 0, 65535, }, /*漏电流故障阈值*/
|
||||
{190, DATATYPE_UINT16_T, 110, 0, 65535, }, /*阈值参考预留1*/
|
||||
{191, DATATYPE_UINT16_T, 10, 0, 3600, }, /*过温判定时间*/
|
||||
{192, DATATYPE_UINT16_T, 60, 0, 3600, }, /*自检超时判定时间*/
|
||||
{193, DATATYPE_UINT16_T, 400, 0, 1200, }, /*绝缘检测母线电压阈值*/
|
||||
{194, DATATYPE_UINT16_T, 5, 0, 1200, }, /*绝缘检测继电器电压阈值*/
|
||||
{195, DATATYPE_UINT16_T, 150, 20, 300, }, /*漏电流3级突变触发阈值*/
|
||||
#if defined(PV_INV30)
|
||||
{196, DATATYPE_UINT16_T, 300, 30, 700, }, /*漏电流缓变动作阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{196, DATATYPE_UINT16_T, 400, 30, 700, }, /*漏电流缓变动作阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{196, DATATYPE_UINT16_T, 500, 30, 700, }, /*漏电流缓变动作阈值*/
|
||||
#else
|
||||
{196, DATATYPE_UINT16_T, 0, 0, 0 }, /*漏电流缓变动作阈值*/
|
||||
#endif
|
||||
{197, DATATYPE_UINT16_T, 10, 0, 100, }, /*漏电流缓变时间阈值*/
|
||||
{198, DATATYPE_UINT16_T, 60, 20, 300, }, /*漏电流1级突变触发阈值*/
|
||||
{199, DATATYPE_UINT16_T, 60, 20, 300, }, /*漏电流2级突变触发阈值*/
|
||||
};
|
||||
|
||||
|
||||
|
||||
bool_t mw_protocol_modbus_check_param_out_of_range(uint16_t us_address, uint16_t us_value)
|
||||
{
|
||||
if(us_address > MAX_VALID_PARAM_ADDRESS)
|
||||
{
|
||||
return true;
|
||||
}
|
||||
if (DATATYPE_UINT16_T == s_ast_param_range[us_address].datatype)
|
||||
{
|
||||
if ((us_value < s_ast_param_range[us_address].min_value) || (us_value > s_ast_param_range[us_address].max_value))
|
||||
{
|
||||
return true;
|
||||
}
|
||||
}
|
||||
else if (DATATYPE_INT16_T == s_ast_param_range[us_address].datatype)
|
||||
{
|
||||
if (((int16_t)us_value < s_ast_param_range[us_address].min_value) || ((int16_t)us_value > s_ast_param_range[us_address].max_value))
|
||||
{
|
||||
return true;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
uint16_t mw_protocol_modbus_get_param_default_value(uint16_t us_address)
|
||||
{
|
||||
if(us_address > MAX_VALID_PARAM_ADDRESS)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
502
test/PV_Inverter/arm/mw_param_manager_arm_struct.h
Normal file
502
test/PV_Inverter/arm/mw_param_manager_arm_struct.h
Normal file
@@ -0,0 +1,502 @@
|
||||
/**************************************************************************
|
||||
* @copyright Copyright (C), 2022, Qingdao Topscomm Communication Co. Ltd.
|
||||
* @file mw_param_manager_arm_struct.h
|
||||
* @brief arm参数表
|
||||
* @author
|
||||
* @date 2024-10-26 16:34:50
|
||||
* @version
|
||||
* @details
|
||||
**************************************************************************/
|
||||
#ifndef __MW_PARAM_MANAGER_ARM_STRUCT_H__
|
||||
#define __MW_PARAM_MANAGER_ARM_STRUCT_H__
|
||||
#include "comm_datatype.h"
|
||||
|
||||
#define APP_TABLE_VERSION 33 //地址表版本
|
||||
|
||||
typedef struct tag_arm_unrecovery_param_t
|
||||
{
|
||||
uint16_t us_reserve1; /*0 预留*/
|
||||
uint16_t aus_mes_code[4]; /*1 设备MES码*/
|
||||
uint16_t aus_product_id[3]; /*5 12位出厂编号*/
|
||||
uint16_t us_hb_test_result; /*8 板级生产检测结果*/
|
||||
uint16_t us_sys_test_result; /*9 工厂整机测试结果*/
|
||||
uint16_t aus_hw_cmpnt_num[3]; /*10 硬件组件号*/
|
||||
uint16_t us_region_code; /*13 行政区域码*/
|
||||
uint16_t us_term_addr; /*14 终端地址*/
|
||||
uint16_t us_sci_baudrate; /*15 对外串口波特率*/
|
||||
uint16_t us_ac_proto_type; /*16 载波协议类型*/
|
||||
uint16_t us_prot645_type; /*17 645协议版本*/
|
||||
uint16_t aus_level_0_cipher[2]; /*18 0级密码*/
|
||||
uint16_t aus_level_1_cipher[2]; /*20 1级密码*/
|
||||
uint16_t aus_level_2_cipher[2]; /*22 2级密码*/
|
||||
uint16_t aus_account_num[3]; /*24 户号*/
|
||||
uint16_t aus_virtual_plant_num[3]; /*27 虚拟电厂编号*/
|
||||
uint16_t us_leak_current_dc_estimate; /*30 漏电流直流偏置AD值*/
|
||||
uint16_t us_leak_current_factor; /*31 漏电流校准系数*/
|
||||
uint16_t aus_state_grid_addr[6]; /*32 国网地址*/
|
||||
uint16_t aus_meter_code_num[6]; /*38 表号（ESAM用）*/
|
||||
uint16_t us_leak_current_inter_refer_mA; /*44 漏电流内部参考值*/
|
||||
uint16_t aus_reserve2[5]; /*45 预留*/
|
||||
}arm_unrecovery_param_t;
|
||||
|
||||
typedef struct tag_arm_comm_cmd_t
|
||||
{
|
||||
uint16_t us_start; /*50 设备开机*/
|
||||
uint16_t us_stop; /*51 设备关机*/
|
||||
uint16_t us_fault_rst; /*52 故障复位*/
|
||||
uint16_t us_unlock_set; /*53 解锁特殊操作*/
|
||||
uint16_t us_device_rst; /*54 设备重启*/
|
||||
uint16_t us_dsp_selfcheck; /*55 功率单元自检(调试)*/
|
||||
uint16_t us_dsp_rst_by_comm; /*56 功率单元重启*/
|
||||
uint16_t us_dsp_reboot; /*57 功率单元强制复位*/
|
||||
uint16_t us_resume_config; /*58 参数还原*/
|
||||
uint16_t us_4g_rst; /*59 复位4G*/
|
||||
uint16_t us_dc_carrier_rst; /*60 直流载波复位*/
|
||||
uint16_t us_ac_carrier_rst; /*61 交流载波复位*/
|
||||
uint16_t us_fault_record_manual; /*62 手动录波*/
|
||||
uint16_t us_data_restore_all; /*63 所有记录数据擦除*/
|
||||
uint16_t us_wave_record_restore; /*64 录波擦除*/
|
||||
uint16_t us_event_restore; /*65 事件擦除*/
|
||||
uint16_t us_error_log_restore; /*66 日志记录擦除*/
|
||||
uint16_t us_freeze_min_restore; /*67 分钟冻结数据擦除*/
|
||||
uint16_t us_freeze_day_restore; /*68 日冻结数据擦除*/
|
||||
uint16_t us_freeze_month_restore; /*69 月冻结数据擦除*/
|
||||
uint16_t us_freeze_year_restore; /*70 年冻结数据擦除*/
|
||||
uint16_t us_comm_frame_restore; /*71 报文记录数据擦除*/
|
||||
uint16_t us_operation_restore; /*72 操作记录数据擦除*/
|
||||
uint16_t us_power_gen_restore; /*73 电量记录数据擦除*/
|
||||
uint16_t elog_print_switch; /*74 打印开关*/
|
||||
uint16_t us_leak_current_dc_en; /*75 漏电流校准直流量(按钮)*/
|
||||
uint16_t us_leak_current_factor_en; /*76 漏电流校准系数(按钮)*/
|
||||
uint16_t us_leak_current_selfcheck_en; /*77 漏电流自检(按钮)*/
|
||||
uint16_t us_system_recover; /*78 恢复出厂设置*/
|
||||
uint16_t aus_reserve3[21]; /*79 预留*/
|
||||
}arm_comm_cmd_t;
|
||||
|
||||
typedef struct tag_arm_devices_set_t
|
||||
{
|
||||
uint16_t us_work_mode_svgc; /*100 工作模式*/
|
||||
uint16_t us_work_mode_svg; /*101 补偿模式选择*/
|
||||
uint16_t us_poweron_mode; /*102 开机模式*/
|
||||
uint16_t us_power_on_delay; /*103 自动开机延时*/
|
||||
uint16_t us_power_on_time_en; /*104 定时开关机使能*/
|
||||
uint16_t aus_power_on_time[3]; /*105 定时开机时间*/
|
||||
uint16_t aus_power_off_time[3]; /*108 定时关机时间*/
|
||||
uint16_t us_low_power_judge_delay; /*111 低功耗判断延时*/
|
||||
uint16_t us_low_power_judge_delay_quit; /*112 退出低功耗判断延时*/
|
||||
uint16_t us_auto_reset_delay; /*113 自动复位延时*/
|
||||
uint16_t us_dsp_wd_enable; /*114 DSP看门狗复位使能*/
|
||||
uint16_t us_freeze_save_period; /*115 分钟冻结周期*/
|
||||
uint16_t us_record_frame_en; /*116 报文记录使能*/
|
||||
uint16_t us_record_frame_dir; /*117 报文记录方向*/
|
||||
uint16_t us_record_frame_port; /*118 报文记录端口*/
|
||||
uint16_t us_record_err_log_en; /*119 错误打印记录使能*/
|
||||
uint16_t us_impd_dete_en; /*120 绝缘阻值检测使能*/
|
||||
uint16_t us_fan_ctr_mode; /*121 风扇控制模式*/
|
||||
uint16_t leak_current_mode; /*122 漏电流模式*/
|
||||
uint16_t us_sys_discharge_start_pwr; /*123 放电起始功率*/
|
||||
uint16_t us_anti_pid_en; /*124 抗PID使能*/
|
||||
uint16_t us_anti_pid_time; /*125 抗PID启动时间*/
|
||||
uint16_t us_auto_restore_delay_value; /*126 自动清除故障模式*/
|
||||
uint16_t us_plc_enable; /*127 交流载波使能*/
|
||||
uint16_t us_control_enable_shanxi; /*128 逆变器控制使能*/
|
||||
uint16_t aus_reserve4[21]; /*129 预留*/
|
||||
}arm_devices_set_t;
|
||||
|
||||
typedef struct tag_arm_comm_t
|
||||
{
|
||||
uint16_t aus_remote_ip[2]; /*150 主站IP*/
|
||||
uint16_t us_remote_port; /*152 主站端口号*/
|
||||
uint16_t us_interactive_cycle_4g; /*153 4G交互周期*/
|
||||
uint16_t us_gprs_com_over_time; /*154 4G通信超时阈值*/
|
||||
uint16_t us_can_enable; /*155 CAN使能*/
|
||||
uint16_t us_can_dev_id; /*156 CAN并机ID*/
|
||||
uint16_t us_can_parallel_num; /*157 CAN并机数量*/
|
||||
uint16_t us_com_over_time; /*158 通信故障判定时间*/
|
||||
uint16_t us_plc_check_comm_period_t; /*159 载波通信超时判断周期*/
|
||||
uint16_t aus_reserve5[10]; /*160 预留*/
|
||||
}arm_comm_t;
|
||||
|
||||
typedef struct tag_arm_devices_limit_param_t
|
||||
{
|
||||
uint16_t us_fan_auto_ctrl_factor; /*170 风扇自动控制因素*/
|
||||
uint16_t us_manual_fan_pwm; /*171 手动风扇占空比*/
|
||||
uint16_t us_fan_pwm_start; /*172 风扇启动占空比*/
|
||||
uint16_t us_fan_pwm_max; /*173 风扇最大占空比*/
|
||||
uint16_t us_fan_start_temp; /*174 风扇启动温度*/
|
||||
uint16_t us_fan_max_temp; /*175 风扇满速温度*/
|
||||
uint16_t us_fan_start_power; /*176 风扇启动功率(额定值%)*/
|
||||
uint16_t us_fan_max_power; /*177 风扇满速功率(额定值%)*/
|
||||
uint16_t us_reserve_param9_1; /*178 幅值参考预留1*/
|
||||
uint16_t us_reserve_param9_2; /*179 幅值参考预留2*/
|
||||
uint16_t us_reserve_param9_3; /*180 幅值参考预留3*/
|
||||
uint16_t us_reserve_param9_4; /*181 幅值参考预留4*/
|
||||
uint16_t us_reserve_param9_5; /*182 幅值参考预留5*/
|
||||
uint16_t us_reserve_param9_6; /*183 幅值参考预留6*/
|
||||
uint16_t us_reserve_param9_7; /*184 幅值参考预留7*/
|
||||
}arm_devices_limit_param_t;
|
||||
|
||||
typedef struct tag_arm_devices_threshold_t
|
||||
{
|
||||
uint16_t us_impd_fault_thrd; /*185 绝缘阻值故障阈值*/
|
||||
uint16_t us_impd_detect_close_time; /*186 绝缘检测闭合时间*/
|
||||
uint16_t us_impd_detect_open_time; /*187 绝缘检测断开时间*/
|
||||
uint16_t us_fan_speed_fault_thrd; /*188 风扇故障转速阈值*/
|
||||
uint16_t us_leak_cur_fault_thrd; /*189 漏电流故障阈值*/
|
||||
uint16_t us_reserve_param1_1; /*190 阈值参考预留1*/
|
||||
uint16_t us_over_temp_time; /*191 过温判定时间*/
|
||||
uint16_t us_self_check_time; /*192 自检超时判定时间*/
|
||||
uint16_t us_insu_bus_volt_thd; /*193 绝缘检测母线电压阈值*/
|
||||
uint16_t us_insu_rly_volt_thd; /*194 绝缘检测继电器电压阈值*/
|
||||
uint16_t us_leak_current_L3_mutation_threshold_mA; /*195 漏电流3级突变触发阈值*/
|
||||
uint16_t us_leak_current_slow_threshold_mA; /*196 漏电流缓变动作阈值*/
|
||||
uint16_t us_leak_current_slow_time_ms; /*197 漏电流缓变时间阈值*/
|
||||
uint16_t us_leak_current_L1_mutation_threshold_mA; /*198 漏电流1级突变触发阈值*/
|
||||
uint16_t us_leak_current_L2_mutation_threshold_mA; /*199 漏电流2级突变触发阈值*/
|
||||
}arm_devices_threshold_t;
|
||||
|
||||
typedef struct tag_arm_devices_data_file_t
|
||||
{
|
||||
uint16_t aus_system_time[6]; /*200 系统时间*/
|
||||
uint16_t us_device_type; /*206 设备类型*/
|
||||
uint16_t us_device_capacity; /*207 设备容量*/
|
||||
uint16_t us_system_run_status; /*208 设备状态*/
|
||||
uint16_t us_arm_protocol_version; /*209 ARM地址表协议版本号*/
|
||||
uint16_t us_can_comm_status; /*210 CAN并机状态*/
|
||||
uint16_t us_can_detection_num; /*211 CAN并机检测数量*/
|
||||
uint16_t aus_main_version[2]; /*212 主控程序版本*/
|
||||
uint16_t aus_main_boot_version[2]; /*214 主控底层程序版本*/
|
||||
uint16_t aus_main_cmpnt_num[3]; /*216 主控程序组件号*/
|
||||
uint16_t amain_version_new[16]; /*219 主控程序版本新格式*/
|
||||
uint16_t aus_reserve6[15]; /*235 预留*/
|
||||
}arm_devices_data_file_t;
|
||||
|
||||
typedef struct tag_arm_comm_ex_device_t
|
||||
{
|
||||
uint16_t aus_ac_carrier_version[3]; /*250 交流载波芯片版本号（年月日版本)*/
|
||||
uint16_t aus_dc_carrier_version[3]; /*253 直流载波芯片版本号（年月日版本)*/
|
||||
uint16_t aus_reserve7[34]; /*256 预留*/
|
||||
}arm_comm_ex_device_t;
|
||||
|
||||
typedef struct tag_arm_fault_code_t
|
||||
{
|
||||
uint16_t us_arm_fault_code1; /*290 ARM故障1*/
|
||||
uint16_t us_arm_fault_code2; /*291 ARM故障2*/
|
||||
uint16_t us_arm_fault_code3; /*292 ARM故障3*/
|
||||
uint16_t us_arm_alarm_code1; /*293 ARM告警1*/
|
||||
uint16_t us_arm_alarm_code2; /*294 ARM告警2*/
|
||||
uint16_t aus_reserve8[5]; /*295 预留*/
|
||||
}arm_fault_code_t;
|
||||
|
||||
typedef struct tag_arm_data_hardware_t
|
||||
{
|
||||
int16_t sh_temp1; /*300 腔体1温度*/
|
||||
int16_t sh_temp2; /*301 腔体2温度*/
|
||||
int16_t sh_temp3; /*302 散热片温度*/
|
||||
int16_t sh_temp_reserve1; /*303 预留测温1*/
|
||||
uint16_t us_inside_fan1_spd; /*304 内部风扇转速1*/
|
||||
uint16_t us_outside_fan1_spd; /*305 外部风扇转速1*/
|
||||
uint16_t us_outside_fan2_spd; /*306 外部风扇转速2*/
|
||||
uint16_t us_impd_val_on; /*307 绝缘继电器闭合电压*/
|
||||
uint16_t us_impd_val_off; /*308 绝缘继电器断开电压*/
|
||||
int16_t us_impd_res_val; /*309 绝缘检测阻值*/
|
||||
uint16_t us_ac_leak_cur_rms; /*310 交流漏电流有效值*/
|
||||
uint16_t us_pid_relay_stat; /*311 PID继电器状态*/
|
||||
int16_t us_impd_res_val_2; /*312 绝缘检测阻值2*/
|
||||
uint16_t us_leak_cur_ad; /*313 漏电流AD值*/
|
||||
int16_t us_prevent_inv_curr_a; /*314 防逆变电流A相*/
|
||||
int16_t us_prevent_inv_curr_b; /*315 防逆变电流B相*/
|
||||
int16_t us_prevent_inv_curr_c; /*316 防逆变电流C相*/
|
||||
uint16_t us_inside_fan2_spd; /*317 内部风扇转速2*/
|
||||
uint16_t us_outside_fan3_spd; /*318 外部风扇转速3*/
|
||||
uint16_t us_out_leak_cur_rms; /*319 外部漏电流有效值*/
|
||||
uint16_t aus_reserve9[10]; /*320 预留*/
|
||||
}arm_data_hardware_t;
|
||||
|
||||
typedef struct tag_arm_thd_data_t
|
||||
{
|
||||
uint16_t us_THD_grid_voltage_a; /*330 网侧电压THD_A*/
|
||||
uint16_t us_THD_grid_voltage_b; /*331 网侧电压THD_B*/
|
||||
uint16_t us_THD_grid_voltage_c; /*332 网侧电压THD_C*/
|
||||
uint16_t us_THD_grid_current_a; /*333 网侧电流THD_A*/
|
||||
uint16_t us_THD_grid_current_b; /*334 网侧电流THD_B*/
|
||||
uint16_t us_THD_grid_current_c; /*335 网侧电流THD_C*/
|
||||
uint16_t us_THD_load_current_a; /*336 负载电流THD_A*/
|
||||
uint16_t us_THD_load_current_b; /*337 负载电流THD_B*/
|
||||
uint16_t us_THD_load_current_c; /*338 负载电流THD_C*/
|
||||
uint16_t aus_THD_harm_grid_voltage_a[50]; /*339 网侧电压谐波THD A相*/
|
||||
uint16_t aus_THD_harm_grid_voltage_b[50]; /*389 网侧电压谐波THD B相*/
|
||||
uint16_t aus_THD_harm_grid_voltage_c[50]; /*439 网侧电压谐波THD C相*/
|
||||
uint16_t aus_THD_harm_device_current_a[50]; /*489 交流电流谐波THD A相*/
|
||||
uint16_t aus_THD_harm_device_current_b[50]; /*539 交流电流谐波THD B相*/
|
||||
uint16_t aus_THD_harm_device_current_c[50]; /*589 交流电流谐波THD C相*/
|
||||
uint16_t aus_reserve10[61]; /*639 预留*/
|
||||
}arm_thd_data_t;
|
||||
|
||||
typedef struct tag_arm_devices_state_data_t
|
||||
{
|
||||
uint16_t us_arm_logic_label; /*700 ARM逻辑状态*/
|
||||
uint16_t us_arm_run_state; /*701 ARM运行状态*/
|
||||
uint16_t us_dsp_run_state; /*702 DSP运行状态*/
|
||||
uint16_t us_data_reserve2; /*703 预留数据1_2*/
|
||||
uint16_t us_data_reserve3; /*704 预留数据1_3*/
|
||||
uint16_t aus_reserve11[5]; /*705 预留*/
|
||||
}arm_devices_state_data_t;
|
||||
|
||||
typedef struct tag_arm_record_data_t
|
||||
{
|
||||
uint16_t aus_power_gen_total[2]; /*710 累计发电量*/
|
||||
uint16_t aus_power_cons_total[2]; /*712 累计耗电量*/
|
||||
uint16_t aus_power_gen_year[2]; /*714 年发电量*/
|
||||
uint16_t aus_power_cons_year[2]; /*716 年耗电量*/
|
||||
uint16_t aus_power_gen_month[2]; /*718 月发电量*/
|
||||
uint16_t aus_power_cons_month[2]; /*720 月耗电量*/
|
||||
uint16_t aus_power_gen_day[2]; /*722 日发电量*/
|
||||
uint16_t aus_power_cons_day[2]; /*724 日耗电量*/
|
||||
uint16_t aus_runtime_total[2]; /*726 总并网运行时间*/
|
||||
uint16_t aus_reserve12[2]; /*728 预留*/
|
||||
}arm_record_data_t;
|
||||
|
||||
|
||||
typedef struct tag_arm_config_param_t
|
||||
{
|
||||
arm_devices_set_t st_arm_devices_set;
|
||||
arm_comm_t st_arm_comm;
|
||||
arm_devices_limit_param_t st_arm_devices_limit_param;
|
||||
arm_devices_threshold_t st_arm_devices_threshold;
|
||||
}arm_config_param_t;
|
||||
|
||||
typedef struct tag_arm_monitor_params_t
|
||||
{
|
||||
arm_devices_data_file_t st_arm_devices_data_file;
|
||||
arm_comm_ex_device_t st_arm_comm_ex_device;
|
||||
arm_fault_code_t st_arm_fault_code;
|
||||
arm_data_hardware_t st_arm_data_hardware;
|
||||
arm_thd_data_t st_arm_thd_data;
|
||||
arm_devices_state_data_t st_arm_devices_state_data;
|
||||
arm_record_data_t st_arm_record_data;
|
||||
}arm_monitor_params_t;
|
||||
|
||||
typedef struct tag_arm_comm_params_t
|
||||
{
|
||||
arm_unrecovery_param_t st_arm_unrecovery_param;
|
||||
arm_comm_cmd_t st_arm_cmd;
|
||||
arm_config_param_t st_config_param;
|
||||
arm_monitor_params_t st_monitor_params;
|
||||
}arm_comm_params_t;
|
||||
|
||||
/*参数地址宏定义*/
|
||||
//arm_unrecovery_param_t
|
||||
#define ARM_MES_CODE_PARAM_ADDR 1 /*设备MES码*/
|
||||
#define ARM_PRODUCT_ID_PARAM_ADDR 5 /*12位出厂编号*/
|
||||
#define ARM_HB_TEST_RESULT_PARAM_ADDR 8 /*板级生产检测结果*/
|
||||
#define ARM_SYS_TEST_RESULT_PARAM_ADDR 9 /*工厂整机测试结果*/
|
||||
#define ARM_HW_CMPNT_NUM_PARAM_ADDR 10 /*硬件组件号*/
|
||||
#define ARM_REGION_CODE_PARAM_ADDR 13 /*行政区域码*/
|
||||
#define ARM_TERM_ADDR_PARAM_ADDR 14 /*终端地址*/
|
||||
#define ARM_SCI_BAUDRATE_PARAM_ADDR 15 /*对外串口波特率*/
|
||||
#define ARM_AC_PROTO_TYPE_PARAM_ADDR 16 /*载波协议类型*/
|
||||
#define ARM_PROT645_TYPE_PARAM_ADDR 17 /*645协议版本*/
|
||||
#define ARM_LEVEL_0_CIPHER_PARAM_ADDR 18 /*0级密码*/
|
||||
#define ARM_LEVEL_1_CIPHER_PARAM_ADDR 20 /*1级密码*/
|
||||
#define ARM_LEVEL_2_CIPHER_PARAM_ADDR 22 /*2级密码*/
|
||||
#define ARM_ACCOUNT_NUM_PARAM_ADDR 24 /*户号*/
|
||||
#define ARM_VIRTUAL_PLANT_NUM_PARAM_ADDR 27 /*虚拟电厂编号*/
|
||||
#define ARM_LEAK_CURRENT_DC_ESTIMATE_PARAM_ADDR 30 /*漏电流直流偏置AD值*/
|
||||
#define ARM_LEAK_CURRENT_FACTOR_PARAM_ADDR 31 /*漏电流校准系数*/
|
||||
#define ARM_STATE_GRID_ADDR_PARAM_ADDR 32 /*国网地址*/
|
||||
#define ARM_METER_CODE_NUM_PARAM_ADDR 38 /*表号（ESAM用）*/
|
||||
#define ARM_LEAK_CURRENT_INTER_REFER_MA_PARAM_ADDR 44 /*漏电流内部参考值*/
|
||||
//arm_comm_cmd_t
|
||||
#define ARM_START_PARAM_ADDR 50 /*设备开机*/
|
||||
#define ARM_STOP_PARAM_ADDR 51 /*设备关机*/
|
||||
#define ARM_FAULT_RST_PARAM_ADDR 52 /*故障复位*/
|
||||
#define ARM_UNLOCK_SET_PARAM_ADDR 53 /*解锁特殊操作*/
|
||||
#define ARM_DEVICE_RST_PARAM_ADDR 54 /*设备重启*/
|
||||
#define ARM_DSP_SELFCHECK_PARAM_ADDR 55 /*功率单元自检(调试)*/
|
||||
#define ARM_DSP_RST_BY_COMM_PARAM_ADDR 56 /*功率单元重启*/
|
||||
#define ARM_DSP_REBOOT_PARAM_ADDR 57 /*功率单元强制复位*/
|
||||
#define ARM_RESUME_CONFIG_PARAM_ADDR 58 /*参数还原*/
|
||||
#define ARM_4G_RST_PARAM_ADDR 59 /*复位4G*/
|
||||
#define ARM_DC_CARRIER_RST_PARAM_ADDR 60 /*直流载波复位*/
|
||||
#define ARM_AC_CARRIER_RST_PARAM_ADDR 61 /*交流载波复位*/
|
||||
#define ARM_FAULT_RECORD_MANUAL_PARAM_ADDR 62 /*手动录波*/
|
||||
#define ARM_DATA_RESTORE_ALL_PARAM_ADDR 63 /*所有记录数据擦除*/
|
||||
#define ARM_WAVE_RECORD_RESTORE_PARAM_ADDR 64 /*录波擦除*/
|
||||
#define ARM_EVENT_RESTORE_PARAM_ADDR 65 /*事件擦除*/
|
||||
#define ARM_ERROR_LOG_RESTORE_PARAM_ADDR 66 /*日志记录擦除*/
|
||||
#define ARM_FREEZE_MIN_RESTORE_PARAM_ADDR 67 /*分钟冻结数据擦除*/
|
||||
#define ARM_FREEZE_DAY_RESTORE_PARAM_ADDR 68 /*日冻结数据擦除*/
|
||||
#define ARM_FREEZE_MONTH_RESTORE_PARAM_ADDR 69 /*月冻结数据擦除*/
|
||||
#define ARM_FREEZE_YEAR_RESTORE_PARAM_ADDR 70 /*年冻结数据擦除*/
|
||||
#define ARM_COMM_FRAME_RESTORE_PARAM_ADDR 71 /*报文记录数据擦除*/
|
||||
#define ARM_OPERATION_RESTORE_PARAM_ADDR 72 /*操作记录数据擦除*/
|
||||
#define ARM_POWER_GEN_RESTORE_PARAM_ADDR 73 /*电量记录数据擦除*/
|
||||
#define ARM_G_PRINT_SWITCH_PARAM_ADDR 74 /*打印开关*/
|
||||
#define ARM_LEAK_CURRENT_DC_EN_PARAM_ADDR 75 /*漏电流校准直流量(按钮)*/
|
||||
#define ARM_LEAK_CURRENT_FACTOR_EN_PARAM_ADDR 76 /*漏电流校准系数(按钮)*/
|
||||
#define ARM_LEAK_CURRENT_SELFCHECK_EN_PARAM_ADDR 77 /*漏电流自检(按钮)*/
|
||||
#define ARM_SYSTEM_RECOVER_PARAM_ADDR 78 /*恢复出厂设置*/
|
||||
//arm_devices_set_t
|
||||
#define ARM_WORK_MODE_SVGC_PARAM_ADDR 100 /*工作模式*/
|
||||
#define ARM_WORK_MODE_SVG_PARAM_ADDR 101 /*补偿模式选择*/
|
||||
#define ARM_POWERON_MODE_PARAM_ADDR 102 /*开机模式*/
|
||||
#define ARM_POWER_ON_DELAY_PARAM_ADDR 103 /*自动开机延时*/
|
||||
#define ARM_POWER_ON_TIME_EN_PARAM_ADDR 104 /*定时开关机使能*/
|
||||
#define ARM_POWER_ON_TIME_PARAM_ADDR 105 /*定时开机时间*/
|
||||
#define ARM_POWER_OFF_TIME_PARAM_ADDR 108 /*定时关机时间*/
|
||||
#define ARM_LOW_POWER_JUDGE_DELAY_PARAM_ADDR 111 /*低功耗判断延时*/
|
||||
#define ARM_LOW_POWER_JUDGE_DELAY_QUIT_PARAM_ADDR 112 /*退出低功耗判断延时*/
|
||||
#define ARM_AUTO_RESET_DELAY_PARAM_ADDR 113 /*自动复位延时*/
|
||||
#define ARM_DSP_WD_ENABLE_PARAM_ADDR 114 /*DSP看门狗复位使能*/
|
||||
#define ARM_FREEZE_SAVE_PERIOD_PARAM_ADDR 115 /*分钟冻结周期*/
|
||||
#define ARM_RECORD_FRAME_EN_PARAM_ADDR 116 /*报文记录使能*/
|
||||
#define ARM_RECORD_FRAME_DIR_PARAM_ADDR 117 /*报文记录方向*/
|
||||
#define ARM_RECORD_FRAME_PORT_PARAM_ADDR 118 /*报文记录端口*/
|
||||
#define ARM_RECORD_ERR_LOG_EN_PARAM_ADDR 119 /*错误打印记录使能*/
|
||||
#define ARM_IMPD_DETE_EN_PARAM_ADDR 120 /*绝缘阻值检测使能*/
|
||||
#define ARM_FAN_CTR_MODE_PARAM_ADDR 121 /*风扇控制模式*/
|
||||
#define ARM_K_CURRENT_MODE_PARAM_ADDR 122 /*漏电流模式*/
|
||||
#define ARM_SYS_DISCHARGE_START_PWR_PARAM_ADDR 123 /*放电起始功率*/
|
||||
#define ARM_ANTI_PID_EN_PARAM_ADDR 124 /*抗PID使能*/
|
||||
#define ARM_ANTI_PID_TIME_PARAM_ADDR 125 /*抗PID启动时间*/
|
||||
#define ARM_AUTO_RESTORE_DELAY_VALUE_PARAM_ADDR 126 /*自动清除故障模式*/
|
||||
#define ARM_PLC_ENABLE_PARAM_ADDR 127 /*交流载波使能*/
|
||||
#define ARM_CONTROL_ENABLE_SHANXI_PARAM_ADDR 128 /*逆变器控制使能*/
|
||||
//arm_comm_t
|
||||
#define ARM_REMOTE_IP_PARAM_ADDR 150 /*主站IP*/
|
||||
#define ARM_REMOTE_PORT_PARAM_ADDR 152 /*主站端口号*/
|
||||
#define ARM_INTERACTIVE_CYCLE_4G_PARAM_ADDR 153 /*4G交互周期*/
|
||||
#define ARM_GPRS_COM_OVER_TIME_PARAM_ADDR 154 /*4G通信超时阈值*/
|
||||
#define ARM_CAN_ENABLE_PARAM_ADDR 155 /*CAN使能*/
|
||||
#define ARM_CAN_DEV_ID_PARAM_ADDR 156 /*CAN并机ID*/
|
||||
#define ARM_CAN_PARALLEL_NUM_PARAM_ADDR 157 /*CAN并机数量*/
|
||||
#define ARM_COM_OVER_TIME_PARAM_ADDR 158 /*通信故障判定时间*/
|
||||
#define ARM_PLC_CHECK_COMM_PERIOD_T_PARAM_ADDR 159 /*载波通信超时判断周期*/
|
||||
//arm_devices_limit_param_t
|
||||
#define ARM_FAN_AUTO_CTRL_FACTOR_PARAM_ADDR 170 /*风扇自动控制因素*/
|
||||
#define ARM_MANUAL_FAN_PWM_PARAM_ADDR 171 /*手动风扇占空比*/
|
||||
#define ARM_FAN_PWM_START_PARAM_ADDR 172 /*风扇启动占空比*/
|
||||
#define ARM_FAN_PWM_MAX_PARAM_ADDR 173 /*风扇最大占空比*/
|
||||
#define ARM_FAN_START_TEMP_PARAM_ADDR 174 /*风扇启动温度*/
|
||||
#define ARM_FAN_MAX_TEMP_PARAM_ADDR 175 /*风扇满速温度*/
|
||||
#define ARM_FAN_START_POWER_PARAM_ADDR 176 /*风扇启动功率(额定值%)*/
|
||||
#define ARM_FAN_MAX_POWER_PARAM_ADDR 177 /*风扇满速功率(额定值%)*/
|
||||
#define ARM_RESERVE_PARAM9_1_PARAM_ADDR 178 /*幅值参考预留1*/
|
||||
#define ARM_RESERVE_PARAM9_2_PARAM_ADDR 179 /*幅值参考预留2*/
|
||||
#define ARM_RESERVE_PARAM9_3_PARAM_ADDR 180 /*幅值参考预留3*/
|
||||
#define ARM_RESERVE_PARAM9_4_PARAM_ADDR 181 /*幅值参考预留4*/
|
||||
#define ARM_RESERVE_PARAM9_5_PARAM_ADDR 182 /*幅值参考预留5*/
|
||||
#define ARM_RESERVE_PARAM9_6_PARAM_ADDR 183 /*幅值参考预留6*/
|
||||
#define ARM_RESERVE_PARAM9_7_PARAM_ADDR 184 /*幅值参考预留7*/
|
||||
//arm_devices_threshold_t
|
||||
#define ARM_IMPD_FAULT_THRD_PARAM_ADDR 185 /*绝缘阻值故障阈值*/
|
||||
#define ARM_IMPD_DETECT_CLOSE_TIME_PARAM_ADDR 186 /*绝缘检测闭合时间*/
|
||||
#define ARM_IMPD_DETECT_OPEN_TIME_PARAM_ADDR 187 /*绝缘检测断开时间*/
|
||||
#define ARM_FAN_SPEED_FAULT_THRD_PARAM_ADDR 188 /*风扇故障转速阈值*/
|
||||
#define ARM_LEAK_CUR_FAULT_THRD_PARAM_ADDR 189 /*漏电流故障阈值*/
|
||||
#define ARM_RESERVE_PARAM1_1_PARAM_ADDR 190 /*阈值参考预留1*/
|
||||
#define ARM_OVER_TEMP_TIME_PARAM_ADDR 191 /*过温判定时间*/
|
||||
#define ARM_SELF_CHECK_TIME_PARAM_ADDR 192 /*自检超时判定时间*/
|
||||
#define ARM_INSU_BUS_VOLT_THD_PARAM_ADDR 193 /*绝缘检测母线电压阈值*/
|
||||
#define ARM_INSU_RLY_VOLT_THD_PARAM_ADDR 194 /*绝缘检测继电器电压阈值*/
|
||||
#define ARM_LEAK_CURRENT_L3_MUTATION_THRESHOLD_MA_PARAM_ADDR 195 /*漏电流3级突变触发阈值*/
|
||||
#define ARM_LEAK_CURRENT_SLOW_THRESHOLD_MA_PARAM_ADDR 196 /*漏电流缓变动作阈值*/
|
||||
#define ARM_LEAK_CURRENT_SLOW_TIME_MS_PARAM_ADDR 197 /*漏电流缓变时间阈值*/
|
||||
#define ARM_LEAK_CURRENT_L1_MUTATION_THRESHOLD_MA_PARAM_ADDR 198 /*漏电流1级突变触发阈值*/
|
||||
#define ARM_LEAK_CURRENT_L2_MUTATION_THRESHOLD_MA_PARAM_ADDR 199 /*漏电流2级突变触发阈值*/
|
||||
//arm_devices_data_file_t
|
||||
#define ARM_SYSTEM_TIME_PARAM_ADDR 200 /*系统时间*/
|
||||
#define ARM_DEVICE_TYPE_PARAM_ADDR 206 /*设备类型*/
|
||||
#define ARM_DEVICE_CAPACITY_PARAM_ADDR 207 /*设备容量*/
|
||||
#define ARM_SYSTEM_RUN_STATUS_PARAM_ADDR 208 /*设备状态*/
|
||||
#define ARM_ARM_PROTOCOL_VERSION_PARAM_ADDR 209 /*ARM地址表协议版本号*/
|
||||
#define ARM_CAN_COMM_STATUS_PARAM_ADDR 210 /*CAN并机状态*/
|
||||
#define ARM_CAN_DETECTION_NUM_PARAM_ADDR 211 /*CAN并机检测数量*/
|
||||
#define ARM_MAIN_VERSION_PARAM_ADDR 212 /*主控程序版本*/
|
||||
#define ARM_MAIN_BOOT_VERSION_PARAM_ADDR 214 /*主控底层程序版本*/
|
||||
#define ARM_MAIN_CMPNT_NUM_PARAM_ADDR 216 /*主控程序组件号*/
|
||||
#define ARM_N_VERSION_NEW_PARAM_ADDR 219 /*主控程序版本新格式*/
|
||||
//arm_comm_ex_device_t
|
||||
#define ARM_AC_CARRIER_VERSION_PARAM_ADDR 250 /*交流载波芯片版本号（年月日版本)*/
|
||||
#define ARM_DC_CARRIER_VERSION_PARAM_ADDR 253 /*直流载波芯片版本号（年月日版本)*/
|
||||
//arm_fault_code_t
|
||||
#define ARM_ARM_FAULT_CODE1_PARAM_ADDR 290 /*ARM故障1*/
|
||||
#define ARM_ARM_FAULT_CODE2_PARAM_ADDR 291 /*ARM故障2*/
|
||||
#define ARM_ARM_FAULT_CODE3_PARAM_ADDR 292 /*ARM故障3*/
|
||||
#define ARM_ARM_ALARM_CODE1_PARAM_ADDR 293 /*ARM告警1*/
|
||||
#define ARM_ARM_ALARM_CODE2_PARAM_ADDR 294 /*ARM告警2*/
|
||||
//arm_data_hardware_t
|
||||
#define ARM_TEMP1_PARAM_ADDR 300 /*腔体1温度*/
|
||||
#define ARM_TEMP2_PARAM_ADDR 301 /*腔体2温度*/
|
||||
#define ARM_TEMP3_PARAM_ADDR 302 /*散热片温度*/
|
||||
#define ARM_TEMP_RESERVE1_PARAM_ADDR 303 /*预留测温1*/
|
||||
#define ARM_INSIDE_FAN1_SPD_PARAM_ADDR 304 /*内部风扇转速1*/
|
||||
#define ARM_OUTSIDE_FAN1_SPD_PARAM_ADDR 305 /*外部风扇转速1*/
|
||||
#define ARM_OUTSIDE_FAN2_SPD_PARAM_ADDR 306 /*外部风扇转速2*/
|
||||
#define ARM_IMPD_VAL_ON_PARAM_ADDR 307 /*绝缘继电器闭合电压*/
|
||||
#define ARM_IMPD_VAL_OFF_PARAM_ADDR 308 /*绝缘继电器断开电压*/
|
||||
#define ARM_IMPD_RES_VAL_PARAM_ADDR 309 /*绝缘检测阻值*/
|
||||
#define ARM_AC_LEAK_CUR_RMS_PARAM_ADDR 310 /*交流漏电流有效值*/
|
||||
#define ARM_PID_RELAY_STAT_PARAM_ADDR 311 /*PID继电器状态*/
|
||||
#define ARM_IMPD_RES_VAL_2_PARAM_ADDR 312 /*绝缘检测阻值2*/
|
||||
#define ARM_LEAK_CUR_AD_PARAM_ADDR 313 /*漏电流AD值*/
|
||||
#define ARM_PREVENT_INV_CURR_A_PARAM_ADDR 314 /*防逆变电流A相*/
|
||||
#define ARM_PREVENT_INV_CURR_B_PARAM_ADDR 315 /*防逆变电流B相*/
|
||||
#define ARM_PREVENT_INV_CURR_C_PARAM_ADDR 316 /*防逆变电流C相*/
|
||||
#define ARM_INSIDE_FAN2_SPD_PARAM_ADDR 317 /*内部风扇转速2*/
|
||||
#define ARM_OUTSIDE_FAN3_SPD_PARAM_ADDR 318 /*外部风扇转速3*/
|
||||
#define ARM_OUT_LEAK_CUR_RMS_PARAM_ADDR 319 /*外部漏电流有效值*/
|
||||
//arm_thd_data_t
|
||||
#define ARM_THD_GRID_VOLTAGE_A_PARAM_ADDR 330 /*网侧电压THD_A*/
|
||||
#define ARM_THD_GRID_VOLTAGE_B_PARAM_ADDR 331 /*网侧电压THD_B*/
|
||||
#define ARM_THD_GRID_VOLTAGE_C_PARAM_ADDR 332 /*网侧电压THD_C*/
|
||||
#define ARM_THD_GRID_CURRENT_A_PARAM_ADDR 333 /*网侧电流THD_A*/
|
||||
#define ARM_THD_GRID_CURRENT_B_PARAM_ADDR 334 /*网侧电流THD_B*/
|
||||
#define ARM_THD_GRID_CURRENT_C_PARAM_ADDR 335 /*网侧电流THD_C*/
|
||||
#define ARM_THD_LOAD_CURRENT_A_PARAM_ADDR 336 /*负载电流THD_A*/
|
||||
#define ARM_THD_LOAD_CURRENT_B_PARAM_ADDR 337 /*负载电流THD_B*/
|
||||
#define ARM_THD_LOAD_CURRENT_C_PARAM_ADDR 338 /*负载电流THD_C*/
|
||||
#define ARM_THD_HARM_GRID_VOLTAGE_A_PARAM_ADDR 339 /*网侧电压谐波THD A相*/
|
||||
#define ARM_THD_HARM_GRID_VOLTAGE_B_PARAM_ADDR 389 /*网侧电压谐波THD B相*/
|
||||
#define ARM_THD_HARM_GRID_VOLTAGE_C_PARAM_ADDR 439 /*网侧电压谐波THD C相*/
|
||||
#define ARM_THD_HARM_DEVICE_CURRENT_A_PARAM_ADDR 489 /*交流电流谐波THD A相*/
|
||||
#define ARM_THD_HARM_DEVICE_CURRENT_B_PARAM_ADDR 539 /*交流电流谐波THD B相*/
|
||||
#define ARM_THD_HARM_DEVICE_CURRENT_C_PARAM_ADDR 589 /*交流电流谐波THD C相*/
|
||||
//arm_devices_state_data_t
|
||||
#define ARM_ARM_LOGIC_LABEL_PARAM_ADDR 700 /*ARM逻辑状态*/
|
||||
#define ARM_ARM_RUN_STATE_PARAM_ADDR 701 /*ARM运行状态*/
|
||||
#define ARM_DSP_RUN_STATE_PARAM_ADDR 702 /*DSP运行状态*/
|
||||
#define ARM_DATA_RESERVE2_PARAM_ADDR 703 /*预留数据1_2*/
|
||||
#define ARM_DATA_RESERVE3_PARAM_ADDR 704 /*预留数据1_3*/
|
||||
//arm_record_data_t
|
||||
#define ARM_POWER_GEN_TOTAL_PARAM_ADDR 710 /*累计发电量*/
|
||||
#define ARM_POWER_CONS_TOTAL_PARAM_ADDR 712 /*累计耗电量*/
|
||||
#define ARM_POWER_GEN_YEAR_PARAM_ADDR 714 /*年发电量*/
|
||||
#define ARM_POWER_CONS_YEAR_PARAM_ADDR 716 /*年耗电量*/
|
||||
#define ARM_POWER_GEN_MONTH_PARAM_ADDR 718 /*月发电量*/
|
||||
#define ARM_POWER_CONS_MONTH_PARAM_ADDR 720 /*月耗电量*/
|
||||
#define ARM_POWER_GEN_DAY_PARAM_ADDR 722 /*日发电量*/
|
||||
#define ARM_POWER_CONS_DAY_PARAM_ADDR 724 /*日耗电量*/
|
||||
#define ARM_RUNTIME_TOTAL_PARAM_ADDR 726 /*总并网运行时间*/
|
||||
|
||||
|
||||
|
||||
typedef struct tag_modbus_param_value_info_t
|
||||
{
|
||||
uint16_t address;
|
||||
uint16_t datatype; /*0:uint16_t 1:int16_t*/
|
||||
int32_t default_value;
|
||||
int32_t min_value;
|
||||
int32_t max_value;
|
||||
}modbus_param_value_info_t;
|
||||
|
||||
|
||||
#define MAX_VALID_PARAM_ADDRESS 199
|
||||
#define DATATYPE_UINT16_T 0
|
||||
#define DATATYPE_INT16_T 1
|
||||
|
||||
bool_t mw_protocol_modbus_check_param_out_of_range(uint16_t us_address, uint16_t us_value);
|
||||
|
||||
|
||||
|
||||
1105
test/PV_Inverter/arm/mw_param_manager_dsp_struct.h
Normal file
1105
test/PV_Inverter/arm/mw_param_manager_dsp_struct.h
Normal file
File diff suppressed because it is too large
Load Diff
684
test/PV_Inverter/dsp/mw_param_manager_dsp_struct.c
Normal file
684
test/PV_Inverter/dsp/mw_param_manager_dsp_struct.c
Normal file
@@ -0,0 +1,684 @@
|
||||
#include <limits.h>
|
||||
#include "project.h"
|
||||
#include "mw_param_manager_dsp_struct.h"
|
||||
|
||||
|
||||
|
||||
|
||||
const modbus_param_value_info_t s_ast_param_range[MAX_VALID_PARAM_ADDRESS + 1] =
|
||||
{
|
||||
/*address, datatype, default_value, min_value, max_value*/
|
||||
{0, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*A相采样校准a（网侧交流电压采样）*/
|
||||
{1, DATATYPE_INT16_T, 0, -32768, 32767, }, /*A相采样校准b（网侧交流电压采样）*/
|
||||
{2, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*B相采样校准a（网侧交流电压采样）*/
|
||||
{3, DATATYPE_INT16_T, 0, -32768, 32767, }, /*B相采样校准b（网侧交流电压采样）*/
|
||||
{4, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*C相采样校准a（网侧交流电压采样）*/
|
||||
{5, DATATYPE_INT16_T, 0, -32768, 32767, }, /*C相采样校准b（网侧交流电压采样）*/
|
||||
{6, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*A相采样校准a(逆变侧电感电流)*/
|
||||
{7, DATATYPE_INT16_T, 0, -32768, 32767, }, /*A相采样校准b(逆变侧电感电流)*/
|
||||
{8, DATATYPE_INT16_T, 0, -32768, 32767, }, /*A相逆变电流相位偏移量*/
|
||||
{9, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*B相采样校准a(逆变侧电感电流)*/
|
||||
{10, DATATYPE_INT16_T, 0, -32768, 32767, }, /*B相采样校准b(逆变侧电感电流)*/
|
||||
{11, DATATYPE_INT16_T, 0, -32768, 32767, }, /*B相逆变电流相位偏移量*/
|
||||
{12, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*C相采样校准a(逆变侧电感电流)*/
|
||||
{13, DATATYPE_INT16_T, 0, -32768, 32767, }, /*C相采样校准b(逆变侧电感电流)*/
|
||||
{14, DATATYPE_INT16_T, 0, -32768, 32767, }, /*C相逆变电流相位偏移量*/
|
||||
{15, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*A相LCL电容电流系数*/
|
||||
{16, DATATYPE_INT16_T, 0, -32768, 32767, }, /*A相LCL电容电流相位偏移量*/
|
||||
{17, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*B相LCL电容电流系数*/
|
||||
{18, DATATYPE_INT16_T, 0, -32768, 32767, }, /*B相LCL电容电流相位偏移量*/
|
||||
{19, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*C相LCL电容电流系数*/
|
||||
{20, DATATYPE_INT16_T, 0, -32768, 32767, }, /*C相LCL电容电流相位偏移量*/
|
||||
{21, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a(BOOST1电感电流)*/
|
||||
{22, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b(BOOST1电感电流)*/
|
||||
{23, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a(BOOST2电感电流)*/
|
||||
{24, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b(BOOST2电感电流)*/
|
||||
{25, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a(BOOST3电感电流)*/
|
||||
{26, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b(BOOST3电感电流)*/
|
||||
{27, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a(BOOST4电感电流)*/
|
||||
{28, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b(BOOST4电感电流)*/
|
||||
{29, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a支路1(输入电压)*/
|
||||
{30, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b支路1(输入电压)*/
|
||||
{31, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a支路2(输入电压）*/
|
||||
{32, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b支路2(输入电压)*/
|
||||
{33, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a支路3(输入电压）*/
|
||||
{34, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b支路3(输入电压)*/
|
||||
{35, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a支路4(输入电压）*/
|
||||
{36, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b支路4(输入电压)*/
|
||||
{37, DATATYPE_UINT16_T, 10000, 7000, 13000, }, /*采样校准a(温度补偿）*/
|
||||
{38, DATATYPE_INT16_T, 0, -32768, 32767, }, /*采样校准b(温度补偿）*/
|
||||
{39, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{40, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{41, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{42, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{43, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{44, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{45, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{46, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{47, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{48, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{49, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{50, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{51, DATATYPE_UINT16_T, 0, 0, 1, }, /*开机*/
|
||||
{52, DATATYPE_UINT16_T, 0, 0, 1, }, /*关机*/
|
||||
{53, DATATYPE_UINT16_T, 0, 0, 1, }, /*故障复位*/
|
||||
{54, DATATYPE_UINT16_T, 0, 0, 1, }, /*芯片复位重启*/
|
||||
{55, DATATYPE_UINT16_T, 0, 0, 1, }, /*功率单元自检（调试）*/
|
||||
{56, DATATYPE_UINT16_T, 0, 0, 1, }, /*参数还原*/
|
||||
{57, DATATYPE_UINT16_T, 0, 0, 1, }, /*过温限功率标志*/
|
||||
{58, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{59, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{60, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{61, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{62, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{63, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{64, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{65, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{66, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{67, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{68, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{69, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{70, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{71, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{72, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{73, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{74, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{75, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{76, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{77, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{78, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{79, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{80, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{81, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{82, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{83, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{84, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{85, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{86, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{87, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{88, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{89, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{90, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{91, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{92, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{93, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{94, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{95, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{96, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{97, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{98, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{99, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{100, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{101, DATATYPE_UINT16_T, 1, 0, 1, }, /*工作使能*/
|
||||
{102, DATATYPE_UINT16_T, 1, 0, 1, }, /*孤岛检测使能*/
|
||||
{103, DATATYPE_UINT16_T, 0, 0, 1, }, /*LVRT使能*/
|
||||
{104, DATATYPE_UINT16_T, 0, 0, 1, }, /*HVRT使能*/
|
||||
{105, DATATYPE_UINT16_T, 1, 0, 1, }, /*MPPT使能*/
|
||||
{106, DATATYPE_UINT16_T, 0, 0, 1, }, /*老化测试使能*/
|
||||
{107, DATATYPE_UINT16_T, 1, 0, 1, }, /*相序异常运行使能*/
|
||||
{108, DATATYPE_UINT16_T, 1, 0, 1, }, /*预留参数1_3*/
|
||||
{109, DATATYPE_UINT16_T, 1800, 1000, 3000, }, /*直流输入电压开机阈值*/
|
||||
{110, DATATYPE_UINT16_T, 1600, 0, 2000, }, /*直流输入电压关机阈值*/
|
||||
#if defined(PV_INV30)
|
||||
{111, DATATYPE_UINT16_T, 330, 0, 600, }, /*最大输出功率限值*/
|
||||
#elif defined(PV_INV40)
|
||||
{111, DATATYPE_UINT16_T, 440, 0, 600, }, /*最大输出功率限值*/
|
||||
#elif defined(PV_INV50)
|
||||
{111, DATATYPE_UINT16_T, 550, 0, 600, }, /*最大输出功率限值*/
|
||||
#else
|
||||
{111, DATATYPE_UINT16_T, 0, 0, 0 }, /*最大输出功率限值*/
|
||||
#endif
|
||||
{112, DATATYPE_UINT16_T, 100, 0, 65535, }, /*功率变化率上限*/
|
||||
{113, DATATYPE_UINT16_T, 0, 0, 3, }, /*无功生成模式*/
|
||||
{114, DATATYPE_INT16_T, 0, -32768, 32767, }, /*恒无功控制给定所需的无功功率*/
|
||||
{115, DATATYPE_INT16_T, 1000, -32768, 32767, }, /*恒功率因数控制给定所需的功率因数*/
|
||||
{116, DATATYPE_UINT16_T, 2200, 2100, 2300, }, /*恒电网电压控制给定目标电网电压*/
|
||||
{117, DATATYPE_UINT16_T, 2, 0, 2, }, /*预留参数1_5*/
|
||||
{118, DATATYPE_UINT16_T, 2, 0, 2, }, /*预留参数1_6*/
|
||||
{119, DATATYPE_UINT16_T, 0, 0, 2, }, /*预留参数1_7*/
|
||||
{120, DATATYPE_UINT16_T, 0, 0, 2, }, /*预留参数1_8*/
|
||||
{121, DATATYPE_UINT16_T, 0, 0, 1, }, /*多峰扫描使能*/
|
||||
{122, DATATYPE_UINT16_T, 5, 1, 10, }, /*多峰扫描时间间隔*/
|
||||
{123, DATATYPE_UINT16_T, 400, 300, 400, }, /*频率-有功控制斜率*/
|
||||
{124, DATATYPE_UINT16_T, 1, 0, 2, }, /*电网恢复等待时间*/
|
||||
{125, DATATYPE_UINT16_T, 200, 100, 300, }, /*孤岛响应时间上限*/
|
||||
{126, DATATYPE_UINT16_T, 200, 150, 200, }, /*预留参数1_9*/
|
||||
{127, DATATYPE_UINT16_T, 30, 10, 40, }, /*MPPT最小扰动步长*/
|
||||
{128, DATATYPE_UINT16_T, 1, 0, 1, }, /*待机母线均压使能*/
|
||||
{129, DATATYPE_UINT16_T, 180, 160, 200, }, /*关机上限时间*/
|
||||
{130, DATATYPE_UINT16_T, 9000, 8500, 10000, }, /*开机电压上限*/
|
||||
{131, DATATYPE_UINT16_T, 10000, 5000, 11000, }, /*追踪电压上限*/
|
||||
{132, DATATYPE_UINT16_T, 0, 0, 1, }, /*低压降额使能*/
|
||||
{133, DATATYPE_UINT16_T, 0, 0, 1, }, /*过压降额使能*/
|
||||
{134, DATATYPE_UINT16_T, 0, 0, 1, }, /*共用一路输入模式*/
|
||||
{135, DATATYPE_UINT16_T, 0, 0, 1, }, /*故障模式*/
|
||||
{136, DATATYPE_UINT16_T, 1, 0, 1, }, /*预留参数1_10*/
|
||||
{137, DATATYPE_UINT16_T, 0, 0, 5, }, /*PV1连接关系*/
|
||||
{138, DATATYPE_UINT16_T, 0, 0, 5, }, /*PV2连接关系*/
|
||||
{139, DATATYPE_UINT16_T, 0, 0, 5, }, /*PV3连接关系*/
|
||||
{140, DATATYPE_UINT16_T, 0, 0, 5, }, /*PV4连接关系*/
|
||||
{141, DATATYPE_UINT16_T, 1, 0, 1, }, /*MPPT波动处理逻辑使能*/
|
||||
{142, DATATYPE_UINT16_T, 1, 0, 1, }, /*有功功率自动调整*/
|
||||
{143, DATATYPE_INT16_T, -3, -32768, 32767, }, /*无功补偿量*/
|
||||
{144, DATATYPE_UINT16_T, 1, 0, 1, }, /*无功闭环补偿使能*/
|
||||
{145, DATATYPE_UINT16_T, 1, 0, 1, }, /*逆变电流补偿使能*/
|
||||
{146, DATATYPE_UINT16_T, 1000, 0, 65535, }, /*逆变电流补偿系数*/
|
||||
{147, DATATYPE_INT16_T, 47, -32768, 32767, }, /*逆变电路延迟角度*/
|
||||
{148, DATATYPE_INT16_T, -50, -32768, 32767, }, /*电容电流延迟角度*/
|
||||
{149, DATATYPE_UINT16_T, 1200, 0, 65535, }, /*电容电流比例系数*/
|
||||
{150, DATATYPE_UINT16_T, 2, 0, 65535, }, /*PV电流比例校准系数*/
|
||||
{151, DATATYPE_UINT16_T, 0, 0, 2, }, /*PV输入校准标志*/
|
||||
{152, DATATYPE_UINT16_T, 15, 0, 65535, }, /*直流功率补偿*/
|
||||
{153, DATATYPE_UINT16_T, 0, 0, 4, }, /*BOOST运行模式*/
|
||||
{154, DATATYPE_UINT16_T, 1, 0, 1, }, /*第1路BOOST使能*/
|
||||
{155, DATATYPE_UINT16_T, 1, 0, 1, }, /*第2路BOOST使能*/
|
||||
{156, DATATYPE_UINT16_T, 1, 0, 1, }, /*第3路BOOST使能*/
|
||||
{157, DATATYPE_UINT16_T, 1, 0, 1, }, /*第4路BOOST使能*/
|
||||
{158, DATATYPE_UINT16_T, 0, 0, 1, }, /*分段保护使能*/
|
||||
{159, DATATYPE_UINT16_T, 1, 0, 1, }, /*PV反接检测使能*/
|
||||
{160, DATATYPE_UINT16_T, 0, 0, 1, }, /*PV回灌检测使能*/
|
||||
{161, DATATYPE_UINT16_T, 1, 0, 1, }, /*孤岛保护兼容频率适应性*/
|
||||
{162, DATATYPE_UINT16_T, 1, 0, 1, }, /*功率控制时无功优先使能*/
|
||||
{163, DATATYPE_UINT16_T, 1, 0, 1, }, /*母线欠压检测使能*/
|
||||
{164, DATATYPE_UINT16_T, 0, 0, 1, }, /*高低穿模式切换*/
|
||||
{165, DATATYPE_UINT16_T, 0, 0, 1, }, /*预留参数1_4*/
|
||||
{166, DATATYPE_UINT16_T, 1, 0, 1, }, /*电压无功控制模式*/
|
||||
{167, DATATYPE_UINT16_T, 1, 0, 1, }, /*精度判断模式*/
|
||||
{168, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{169, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{170, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{171, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{172, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{173, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{174, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{175, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{176, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{177, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{178, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{179, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{180, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{181, DATATYPE_UINT16_T, 5, 0, 65535, }, /*外环PI控制：Kp*/
|
||||
{182, DATATYPE_UINT16_T, 200, 0, 65535, }, /*外环PI控制：Ki*/
|
||||
#if defined(PV_INV30)
|
||||
{183, DATATYPE_UINT16_T, 780, 0, 65535, }, /*外环PI控制：OutLimit*/
|
||||
#elif defined(PV_INV40)
|
||||
{183, DATATYPE_UINT16_T, 1010, 0, 65535, }, /*外环PI控制：OutLimit*/
|
||||
#elif defined(PV_INV50)
|
||||
{183, DATATYPE_UINT16_T, 1250, 0, 65535, }, /*外环PI控制：OutLimit*/
|
||||
#else
|
||||
{183, DATATYPE_UINT16_T, 0, 0, 0 }, /*外环PI控制：OutLimit*/
|
||||
#endif
|
||||
{184, DATATYPE_UINT16_T, 1, 0, 65535, }, /*均压环PI控制：Kp*/
|
||||
{185, DATATYPE_UINT16_T, 0, 0, 65535, }, /*均压环PI控制：Ki*/
|
||||
{186, DATATYPE_UINT16_T, 100, 0, 65535, }, /*均压环PI控制：OutLimit*/
|
||||
{187, DATATYPE_UINT16_T, 10, 0, 65535, }, /*电流环Kp */
|
||||
{188, DATATYPE_UINT16_T, 0, 0, 65535, }, /*有源阻尼Kp*/
|
||||
{189, DATATYPE_UINT16_T, 5, 0, 65535, }, /*无功稳压控制Kp*/
|
||||
{190, DATATYPE_UINT16_T, 10, 0, 65535, }, /*无功稳压控制Ki*/
|
||||
{191, DATATYPE_UINT16_T, 100, 0, 65535, }, /*电流环q轴PI控制:Ki*/
|
||||
{192, DATATYPE_UINT16_T, 2250, 0, 65535, }, /*电流环q轴PI控制:OutLimit*/
|
||||
{193, DATATYPE_UINT16_T, 10, 0, 65535, }, /*零序电流PI控制:Kp*/
|
||||
{194, DATATYPE_UINT16_T, 1000, 0, 65535, }, /*零序电流PI控制:Ki*/
|
||||
{195, DATATYPE_UINT16_T, 2250, 0, 65535, }, /*零序电流PI控制:OutLimit*/
|
||||
{196, DATATYPE_UINT16_T, 500, 0, 65535, }, /*1次谐振增益*/
|
||||
{197, DATATYPE_UINT16_T, 200, 0, 65535, }, /*2次谐振增益*/
|
||||
{198, DATATYPE_UINT16_T, 300, 0, 65535, }, /*3次谐振增益*/
|
||||
{199, DATATYPE_UINT16_T, 200, 0, 65535, }, /*4次谐振增益*/
|
||||
{200, DATATYPE_UINT16_T, 300, 0, 65535, }, /*5次谐振增益*/
|
||||
{201, DATATYPE_UINT16_T, 200, 0, 65535, }, /*6次谐振增益*/
|
||||
{202, DATATYPE_UINT16_T, 400, 0, 65535, }, /*7次谐振增益*/
|
||||
{203, DATATYPE_UINT16_T, 200, 0, 65535, }, /*8次谐振增益*/
|
||||
{204, DATATYPE_UINT16_T, 300, 0, 65535, }, /*9次谐振增益*/
|
||||
{205, DATATYPE_UINT16_T, 200, 0, 65535, }, /*10次谐振增益*/
|
||||
{206, DATATYPE_UINT16_T, 200, 0, 65535, }, /*11次谐振增益*/
|
||||
{207, DATATYPE_UINT16_T, 200, 0, 65535, }, /*12次谐振增益*/
|
||||
{208, DATATYPE_UINT16_T, 200, 0, 65535, }, /*13次谐振增益*/
|
||||
{209, DATATYPE_UINT16_T, 200, 0, 65535, }, /*boost电压环Kp*/
|
||||
{210, DATATYPE_UINT16_T, 1000, 0, 65535, }, /*boost电压环Ki*/
|
||||
{211, DATATYPE_UINT16_T, 2, 0, 65535, }, /*boost电流环Kp*/
|
||||
{212, DATATYPE_UINT16_T, 500, 0, 65535, }, /*boost电流环Ki*/
|
||||
{213, DATATYPE_UINT16_T, 150, 0, 65535, }, /*低电压穿越系数*/
|
||||
{214, DATATYPE_UINT16_T, 150, 0, 65535, }, /*高电压穿越系数*/
|
||||
#if defined(PV_INV30)
|
||||
{215, DATATYPE_UINT16_T, 3, 0, 10, }, /*调制方式*/
|
||||
#elif defined(PV_INV40)
|
||||
{215, DATATYPE_UINT16_T, 3, 0, 10, }, /*调制方式*/
|
||||
#elif defined(PV_INV50)
|
||||
{215, DATATYPE_UINT16_T, 3, 0, 10, }, /*调制方式*/
|
||||
#else
|
||||
{215, DATATYPE_UINT16_T, 0, 0, 0 }, /*调制方式*/
|
||||
#endif
|
||||
{216, DATATYPE_UINT16_T, 1, 0, 65535, }, /*电压前馈方式*/
|
||||
{217, DATATYPE_UINT16_T, 5850, 0, 65535, }, /*母线电压参考值下限*/
|
||||
{218, DATATYPE_UINT16_T, 8, 0, 65535, }, /*零序分量控制kp参数*/
|
||||
{219, DATATYPE_UINT16_T, 7, 0, 65535, }, /*加权前馈的占比系数*/
|
||||
{220, DATATYPE_UINT16_T, 0, 0, 65535, }, /*限功率模式使能*/
|
||||
{221, DATATYPE_UINT16_T, 200, 0, 65535, }, /*孤岛保护Kp*/
|
||||
{222, DATATYPE_UINT16_T, 864, 0, 65535, }, /*进入CPWM调制度阈值*/
|
||||
{223, DATATYPE_UINT16_T, 888, 0, 65535, }, /*进入DPWM调制度阈值*/
|
||||
#if defined(PV_INV30)
|
||||
{224, DATATYPE_UINT16_T, 5350, 0, 11000, }, /*进入CPWM母线电压阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{224, DATATYPE_UINT16_T, 7200, 0, 11000, }, /*进入CPWM母线电压阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{224, DATATYPE_UINT16_T, 7200, 0, 11000, }, /*进入CPWM母线电压阈值*/
|
||||
#else
|
||||
{224, DATATYPE_UINT16_T, 0, 0, 0 }, /*进入CPWM母线电压阈值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{225, DATATYPE_UINT16_T, 5450, 0, 11000, }, /*进入DPWM母线电压阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{225, DATATYPE_UINT16_T, 7000, 0, 11000, }, /*进入DPWM母线电压阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{225, DATATYPE_UINT16_T, 7000, 0, 11000, }, /*进入DPWM母线电压阈值*/
|
||||
#else
|
||||
{225, DATATYPE_UINT16_T, 0, 0, 0 }, /*进入DPWM母线电压阈值*/
|
||||
#endif
|
||||
{226, DATATYPE_UINT16_T, 7500, 0, 65535, }, /*直流电压参考*/
|
||||
{227, DATATYPE_UINT16_T, 3200, 0, 65535, }, /*交流电压参考*/
|
||||
{228, DATATYPE_INT16_T, 0, -32768, 32767, }, /*无功电流参考*/
|
||||
{229, DATATYPE_UINT16_T, 0, 0, 50, }, /*boost1电流参考值*/
|
||||
{230, DATATYPE_UINT16_T, 0, 0, 50, }, /*boost2电流参考值*/
|
||||
{231, DATATYPE_UINT16_T, 0, 0, 50, }, /*boost3电流参考值*/
|
||||
{232, DATATYPE_UINT16_T, 0, 0, 50, }, /*boost4电流参考值*/
|
||||
{233, DATATYPE_INT16_T, 0, -32768, 32767, }, /*有功电流参考*/
|
||||
{234, DATATYPE_UINT16_T, 200, 0, 10000, }, /*无功调压系数*/
|
||||
{235, DATATYPE_UINT16_T, 400, 0, 2000, }, /*共模电流幅值阈值*/
|
||||
{236, DATATYPE_UINT16_T, 12, 0, 20000, }, /*CPWM共模电流次数*/
|
||||
{237, DATATYPE_UINT16_T, 6, 0, 20000, }, /*DPWM共模电流次数*/
|
||||
{238, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{239, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{240, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{241, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{242, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{243, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{244, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{245, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{246, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{247, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{248, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{249, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{250, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{251, DATATYPE_UINT16_T, 10200, 10000, 12000, }, /*开路电压过高阈值*/
|
||||
{252, DATATYPE_UINT16_T, 10500, 10000, 12000, }, /*直流输入过压阈值*/
|
||||
{253, DATATYPE_UINT16_T, 5250, 0, 6000, }, /*直流母线过压阈值*/
|
||||
{254, DATATYPE_UINT16_T, 2000, 0, 5500, }, /*直流母线欠压阈值*/
|
||||
#if defined(PV_INV30)
|
||||
{255, DATATYPE_UINT16_T, 1000, 0, 2000, }, /*逆变电流保护瞬时值*/
|
||||
#elif defined(PV_INV40)
|
||||
{255, DATATYPE_UINT16_T, 1270, 0, 2000, }, /*逆变电流保护瞬时值*/
|
||||
#elif defined(PV_INV50)
|
||||
{255, DATATYPE_UINT16_T, 1450, 0, 2000, }, /*逆变电流保护瞬时值*/
|
||||
#else
|
||||
{255, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变电流保护瞬时值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{256, DATATYPE_UINT16_T, 550, 500, 550, }, /*逆变电流保护有效值*/
|
||||
#elif defined(PV_INV40)
|
||||
{256, DATATYPE_UINT16_T, 700, 500, 800, }, /*逆变电流保护有效值*/
|
||||
#elif defined(PV_INV50)
|
||||
{256, DATATYPE_UINT16_T, 900, 500, 1000, }, /*逆变电流保护有效值*/
|
||||
#else
|
||||
{256, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变电流保护有效值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{257, DATATYPE_UINT16_T, 900, 0, 1500, }, /*逆变电流逐波限流封锁阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{257, DATATYPE_UINT16_T, 900, 0, 1500, }, /*逆变电流逐波限流封锁阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{257, DATATYPE_UINT16_T, 900, 0, 1500, }, /*逆变电流逐波限流封锁阈值*/
|
||||
#else
|
||||
{257, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变电流逐波限流封锁阈值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{258, DATATYPE_UINT16_T, 750, 700, 1000, }, /*逆变电流逐波限流解封阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{258, DATATYPE_UINT16_T, 750, 700, 1000, }, /*逆变电流逐波限流解封阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{258, DATATYPE_UINT16_T, 750, 700, 1000, }, /*逆变电流逐波限流解封阈值*/
|
||||
#else
|
||||
{258, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变电流逐波限流解封阈值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{259, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost1过流软件保护阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{259, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost1过流软件保护阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{259, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost1过流软件保护阈值*/
|
||||
#else
|
||||
{259, DATATYPE_UINT16_T, 0, 0, 0 }, /*Boost1过流软件保护阈值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{260, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost2过流软件保护阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{260, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost2过流软件保护阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{260, DATATYPE_UINT16_T, 840, 450, 1000, }, /*Boost2过流软件保护阈值*/
|
||||
#else
|
||||
{260, DATATYPE_UINT16_T, 0, 0, 0 }, /*Boost2过流软件保护阈值*/
|
||||
#endif
|
||||
{261, DATATYPE_UINT16_T, 750, 450, 1000, }, /*Boost3过流软件保护阈值*/
|
||||
{262, DATATYPE_UINT16_T, 750, 450, 1000, }, /*Boost4过流软件保护阈值*/
|
||||
{263, DATATYPE_UINT16_T, 1000, 0, 1100, }, /*MPPT短路电压阈值*/
|
||||
{264, DATATYPE_UINT16_T, 20, 0, 50, }, /*MPPT短路电流阈值*/
|
||||
{265, DATATYPE_UINT16_T, 2200, 2100, 2400, }, /*额定电网保护电压*/
|
||||
{266, DATATYPE_UINT16_T, 2860, 2000, 3000, }, /*电网过压阈值*/
|
||||
{267, DATATYPE_UINT16_T, 1540, 1200, 2600, }, /*电网欠压阈值*/
|
||||
{268, DATATYPE_UINT16_T, 1100, 1000, 1200, }, /*电网欠压二级保护阈值*/
|
||||
{269, DATATYPE_UINT16_T, 1870, 1770, 1970, }, /*电网欠压一级保护阈值*/
|
||||
{270, DATATYPE_UINT16_T, 2420, 2100, 2630, }, /*电网过压一级保护阈值*/
|
||||
{271, DATATYPE_UINT16_T, 2970, 2900, 3000, }, /*电网过压二级保护阈值*/
|
||||
{272, DATATYPE_UINT16_T, 2600, 2550, 2650, }, /*过压降额阈值*/
|
||||
{273, DATATYPE_UINT16_T, 505, 450, 550, }, /*电网频率上限*/
|
||||
{274, DATATYPE_UINT16_T, 480, 450, 550, }, /*电网频率下限*/
|
||||
{275, DATATYPE_UINT16_T, 4650, 4600, 4700, }, /*电网欠频五级保护阈值*/
|
||||
{276, DATATYPE_UINT16_T, 4700, 4650, 4750, }, /*电网欠频四级保护阈值*/
|
||||
{277, DATATYPE_UINT16_T, 4750, 4700, 4800, }, /*电网欠频三级保护阈值*/
|
||||
{278, DATATYPE_UINT16_T, 4800, 4750, 4850, }, /*电网欠频二级保护阈值*/
|
||||
{279, DATATYPE_UINT16_T, 4850, 4800, 4900, }, /*电网欠频一级保护阈值*/
|
||||
{280, DATATYPE_UINT16_T, 5050, 5000, 5100, }, /*电网过频一级保护阈值*/
|
||||
{281, DATATYPE_UINT16_T, 5100, 5050, 5150, }, /*电网过频二级保护阈值*/
|
||||
{282, DATATYPE_UINT16_T, 5150, 5100, 5200, }, /*电网过频三级保护阈值*/
|
||||
{283, DATATYPE_UINT16_T, 5003, 5000, 5010, }, /*过频降额阈值*/
|
||||
{284, DATATYPE_UINT16_T, 120, 50, 200, }, /*滤波电容过流保护阈值*/
|
||||
{285, DATATYPE_UINT16_T, 3300, 2000, 3500, }, /*滤波电容过压保护阈值*/
|
||||
{286, DATATYPE_UINT16_T, 700, 300, 1000, }, /*绝缘阻抗检测阈值*/
|
||||
{287, DATATYPE_UINT16_T, 0, 0, 1, }, /*电网故障屏蔽内部故障*/
|
||||
{288, DATATYPE_UINT16_T, 10, 5, 20, }, /*主动反孤岛阈值*/
|
||||
{289, DATATYPE_UINT16_T, 20, 10, 30, }, /*反孤岛无功电流余量*/
|
||||
{290, DATATYPE_UINT16_T, 0, 0, 65535, }, /*PV接线检测(未启用)*/
|
||||
{291, DATATYPE_UINT16_T, 200, 40, 500, }, /*PV反接电压阈值*/
|
||||
{292, DATATYPE_UINT16_T, 10, 0, 90, }, /*PV反接电感电流阈值*/
|
||||
{293, DATATYPE_UINT16_T, 0, 0, 65535, }, /*PV回灌电压阈值*/
|
||||
{294, DATATYPE_UINT16_T, 0, 0, 65535, }, /*支路输入电流阈值*/
|
||||
{295, DATATYPE_INT16_T, -10, -50, 0, }, /*支路输入电流阈值1*/
|
||||
{296, DATATYPE_UINT16_T, 10, 0, 50, }, /*支路输入电流阈值2*/
|
||||
{297, DATATYPE_UINT16_T, 200, 0, 65535, }, /*节能告警阈值1*/
|
||||
{298, DATATYPE_UINT16_T, 300, 0, 65535, }, /*节能告警阈值2*/
|
||||
{299, DATATYPE_UINT16_T, 85, 10, 1000, }, /*腔体过温阈值*/
|
||||
{300, DATATYPE_UINT16_T, 110, 10, 1000, }, /*腔体2过温阈值*/
|
||||
{301, DATATYPE_UINT16_T, 85, 10, 1000, }, /*散热片过温阈值*/
|
||||
{302, DATATYPE_UINT16_T, 90, 0, 65535, }, /*Q-U低压系数阈值*/
|
||||
{303, DATATYPE_UINT16_T, 110, 0, 65535, }, /*Q-U高压系数阈值*/
|
||||
{304, DATATYPE_UINT16_T, 90, 0, 65535, }, /*低穿穿越边界*/
|
||||
{305, DATATYPE_UINT16_T, 110, 0, 65535, }, /*高穿穿越边界*/
|
||||
{306, DATATYPE_UINT16_T, 100, 0, 10000, }, /*滤波电容过流保护时间*/
|
||||
{307, DATATYPE_UINT16_T, 100, 0, 10000, }, /*逆变过流保护时间*/
|
||||
{308, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网过压L0保护时间*/
|
||||
{309, DATATYPE_UINT16_T, 1000, 0, 30000, }, /*电网过压L1保护时间*/
|
||||
{310, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网过压L2保护时间*/
|
||||
{311, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网欠压L0保护时间*/
|
||||
{312, DATATYPE_UINT16_T, 1000, 0, 30000, }, /*电网欠压L1保护时间*/
|
||||
{313, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网欠压L2保护时间*/
|
||||
{314, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网过频L0保护时间*/
|
||||
{315, DATATYPE_UINT16_T, 190, 0, 10000, }, /*电网过频L1保护时间*/
|
||||
{316, DATATYPE_UINT16_T, 40, 0, 10000, }, /*电网过频L2保护时间*/
|
||||
{317, DATATYPE_UINT16_T, 200, 0, 30000, }, /*电网过频L3保护时间*/
|
||||
{318, DATATYPE_UINT16_T, 100, 0, 30000, }, /*电网欠频L0保护时间*/
|
||||
{319, DATATYPE_UINT16_T, 310, 0, 10000, }, /*电网欠频L1保护时间*/
|
||||
{320, DATATYPE_UINT16_T, 70, 0, 10000, }, /*电网欠频L2保护时间*/
|
||||
{321, DATATYPE_UINT16_T, 30, 0, 10000, }, /*电网欠频L3保护时间*/
|
||||
{322, DATATYPE_UINT16_T, 15, 0, 10000, }, /*电网欠频L4保护时间*/
|
||||
{323, DATATYPE_UINT16_T, 200, 0, 30000, }, /*电网欠频L5保护时间*/
|
||||
{324, DATATYPE_UINT16_T, 1000, 0, 30000, }, /*母线欠压保护时间*/
|
||||
{325, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{326, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{327, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{328, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{329, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{330, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
#if defined(PV_INV30)
|
||||
{331, DATATYPE_UINT16_T, 455, 0, 7000, }, /*高低穿无功电流限幅值*/
|
||||
#elif defined(PV_INV40)
|
||||
{331, DATATYPE_UINT16_T, 610, 0, 7000, }, /*高低穿无功电流限幅值*/
|
||||
#elif defined(PV_INV50)
|
||||
{331, DATATYPE_UINT16_T, 760, 0, 7000, }, /*高低穿无功电流限幅值*/
|
||||
#else
|
||||
{331, DATATYPE_UINT16_T, 0, 0, 0 }, /*高低穿无功电流限幅值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{332, DATATYPE_UINT16_T, 520, 0, 7500, }, /*逆变总电流限幅值*/
|
||||
#elif defined(PV_INV40)
|
||||
{332, DATATYPE_UINT16_T, 690, 0, 7500, }, /*逆变总电流限幅值*/
|
||||
#elif defined(PV_INV50)
|
||||
{332, DATATYPE_UINT16_T, 860, 0, 7500, }, /*逆变总电流限幅值*/
|
||||
#else
|
||||
{332, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变总电流限幅值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{333, DATATYPE_UINT16_T, 520, 0, 7500, }, /*逆变有功电流限幅值*/
|
||||
#elif defined(PV_INV40)
|
||||
{333, DATATYPE_UINT16_T, 690, 0, 7500, }, /*逆变有功电流限幅值*/
|
||||
#elif defined(PV_INV50)
|
||||
{333, DATATYPE_UINT16_T, 860, 0, 7500, }, /*逆变有功电流限幅值*/
|
||||
#else
|
||||
{333, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变有功电流限幅值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{334, DATATYPE_UINT16_T, 320, 0, 5000, }, /*逆变无功电流限幅值*/
|
||||
#elif defined(PV_INV40)
|
||||
{334, DATATYPE_UINT16_T, 420, 0, 5000, }, /*逆变无功电流限幅值*/
|
||||
#elif defined(PV_INV50)
|
||||
{334, DATATYPE_UINT16_T, 520, 0, 5000, }, /*逆变无功电流限幅值*/
|
||||
#else
|
||||
{334, DATATYPE_UINT16_T, 0, 0, 0 }, /*逆变无功电流限幅值*/
|
||||
#endif
|
||||
{335, DATATYPE_UINT16_T, 400, 0, 1000, }, /*Boost1单路电流限幅值*/
|
||||
{336, DATATYPE_UINT16_T, 300, 0, 1000, }, /*Boost2单路电流限幅值*/
|
||||
{337, DATATYPE_UINT16_T, 300, 0, 1000, }, /*Boost3单路电流限幅值*/
|
||||
{338, DATATYPE_UINT16_T, 300, 0, 1000, }, /*Boost4单路电流限幅值*/
|
||||
{339, DATATYPE_UINT16_T, 0, 0, 65535, }, /*5次谐波电流限幅值*/
|
||||
{340, DATATYPE_UINT16_T, 0, 0, 65535, }, /*7次谐波电流限幅值*/
|
||||
{341, DATATYPE_UINT16_T, 0, 0, 65535, }, /*11次谐波电流限幅值*/
|
||||
{342, DATATYPE_UINT16_T, 0, 0, 65535, }, /*13次谐波电流限幅值*/
|
||||
{343, DATATYPE_UINT16_T, 0, 0, 65535, }, /*17次谐波电流限幅值*/
|
||||
{344, DATATYPE_UINT16_T, 0, 0, 65535, }, /*19次谐波电流限幅值*/
|
||||
{345, DATATYPE_UINT16_T, 0, 0, 65535, }, /*2次谐波电流限幅值*/
|
||||
{346, DATATYPE_UINT16_T, 0, 0, 65535, }, /*4次谐波电流限幅值*/
|
||||
{347, DATATYPE_UINT16_T, 0, 0, 65535, }, /*6次谐波电流限幅值*/
|
||||
{348, DATATYPE_UINT16_T, 0, 0, 65535, }, /*8次谐波电流限幅值*/
|
||||
{349, DATATYPE_UINT16_T, 0, 0, 65535, }, /*10次谐波电流限幅值*/
|
||||
{350, DATATYPE_UINT16_T, 0, 0, 65535, }, /*14次谐波电流限幅值*/
|
||||
{351, DATATYPE_UINT16_T, 0, 0, 65535, }, /*16次谐波电流限幅值*/
|
||||
{352, DATATYPE_UINT16_T, 0, 0, 65535, }, /*20次谐波电流限幅值*/
|
||||
#if defined(PV_INV30)
|
||||
{353, DATATYPE_UINT16_T, 8000, 0, 65535, }, /*进入DPWM视在功率阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{353, DATATYPE_UINT16_T, 5000, 0, 65535, }, /*进入DPWM视在功率阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{353, DATATYPE_UINT16_T, 5000, 0, 65535, }, /*进入DPWM视在功率阈值*/
|
||||
#else
|
||||
{353, DATATYPE_UINT16_T, 0, 0, 0 }, /*进入DPWM视在功率阈值*/
|
||||
#endif
|
||||
#if defined(PV_INV30)
|
||||
{354, DATATYPE_UINT16_T, 8900, 0, 65535, }, /*进入CPWM视在功率阈值*/
|
||||
#elif defined(PV_INV40)
|
||||
{354, DATATYPE_UINT16_T, 6000, 0, 65535, }, /*进入CPWM视在功率阈值*/
|
||||
#elif defined(PV_INV50)
|
||||
{354, DATATYPE_UINT16_T, 6000, 0, 65535, }, /*进入CPWM视在功率阈值*/
|
||||
#else
|
||||
{354, DATATYPE_UINT16_T, 0, 0, 0 }, /*进入CPWM视在功率阈值*/
|
||||
#endif
|
||||
{355, DATATYPE_UINT16_T, 60, 0, 1000, }, /*零序超前补偿kp*/
|
||||
{356, DATATYPE_UINT16_T, 800, 0, 65535, }, /*散热片过温降功率阈值*/
|
||||
{357, DATATYPE_UINT16_T, 800, 0, 65535, }, /*腔体过温降功率阈值*/
|
||||
{358, DATATYPE_UINT16_T, 1050, 0, 65535, }, /*腔体2过温降功率阈值*/
|
||||
{359, DATATYPE_UINT16_T, 100, 0, 65535, }, /*过温降额功率下限*/
|
||||
{360, DATATYPE_UINT16_T, 100, 0, 65535, }, /*风扇故障降额功率下限*/
|
||||
{361, DATATYPE_UINT16_T, 100, 0, 65535, }, /*过温降额功率上限*/
|
||||
{362, DATATYPE_UINT16_T, 100, 0, 65535, }, /*过温降额功率变化率上限*/
|
||||
{363, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{364, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{365, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{366, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{367, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{368, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{369, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{370, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{371, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{372, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{373, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{374, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{375, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{376, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{377, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{378, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{379, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{380, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{381, DATATYPE_UINT16_T, 0, 0, 1, }, /*预留参数5_0*/
|
||||
{382, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数5_1*/
|
||||
{383, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数5_2*/
|
||||
{384, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数5_3*/
|
||||
{385, DATATYPE_UINT16_T, 0, 0, 65535, }, /*整机状态*/
|
||||
{386, DATATYPE_UINT16_T, 0, 0, 65535, }, /*逆变状态*/
|
||||
{387, DATATYPE_UINT16_T, 0, 0, 65535, }, /*MPPT1状态(debug)*/
|
||||
{388, DATATYPE_UINT16_T, 0, 0, 65535, }, /*MPPT2状态(debug)*/
|
||||
{389, DATATYPE_UINT16_T, 0, 0, 65535, }, /*MPPT3状态(debug)*/
|
||||
{390, DATATYPE_UINT16_T, 0, 0, 65535, }, /*MPPT4状态(debug)*/
|
||||
{391, DATATYPE_UINT16_T, 0, 0, 65535, }, /*功率不足标志*/
|
||||
{392, DATATYPE_UINT16_T, 0, 0, 1, }, /*MPPT手动参考标志位*/
|
||||
{393, DATATYPE_UINT16_T, 600, 0, 1000, }, /*MPPT手动参考值*/
|
||||
{394, DATATYPE_UINT16_T, 500, 0, 65535, }, /*母线均压开启阈值*/
|
||||
{395, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数5_4*/
|
||||
{396, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数5_5*/
|
||||
{397, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{398, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{399, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{400, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{401, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{402, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{403, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{404, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{405, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{406, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{407, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{408, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{409, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{410, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{411, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{412, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{413, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{414, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{415, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{416, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{417, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{418, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{419, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{420, DATATYPE_UINT16_T, 1, 0, 100, }, /*自动化校准使能*/
|
||||
{421, DATATYPE_UINT16_T, 0, 0, 1, }, /*自动化校准状态*/
|
||||
{422, DATATYPE_UINT16_T, 0, 0, 1, }, /*自动化校准指令*/
|
||||
{423, DATATYPE_UINT16_T, 0, 0, 1, }, /*自动化校准结果*/
|
||||
{424, DATATYPE_UINT16_T, 0, 0, 65535, }, /*自动化校准刷新标志*/
|
||||
{425, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_6*/
|
||||
{426, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_7*/
|
||||
{427, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_8*/
|
||||
{428, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_9*/
|
||||
{429, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_10*/
|
||||
{430, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_11*/
|
||||
{431, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_12*/
|
||||
{432, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_13*/
|
||||
{433, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_14*/
|
||||
{434, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_15*/
|
||||
{435, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_16*/
|
||||
{436, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_17*/
|
||||
{437, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_18*/
|
||||
{438, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_19*/
|
||||
{439, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_20*/
|
||||
{440, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_21*/
|
||||
{441, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_22*/
|
||||
{442, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_23*/
|
||||
{443, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_24*/
|
||||
{444, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_25*/
|
||||
{445, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_26*/
|
||||
{446, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_27*/
|
||||
{447, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_28*/
|
||||
{448, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_29*/
|
||||
{449, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_30*/
|
||||
{450, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_31*/
|
||||
{451, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_32*/
|
||||
{452, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_33*/
|
||||
{453, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_34*/
|
||||
{454, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_35*/
|
||||
{455, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_36*/
|
||||
{456, DATATYPE_UINT16_T, 0, 0, 65535, }, /*预留参数6_37*/
|
||||
{457, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{458, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{459, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{460, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{461, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{462, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{463, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{464, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{465, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{466, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{467, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{468, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{469, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{470, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{471, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{472, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{473, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{474, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{475, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{476, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{477, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{478, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{479, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{480, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{481, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{482, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{483, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{484, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{485, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{486, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{487, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{488, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{489, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{490, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{491, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{492, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{493, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{494, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{495, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{496, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{497, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{498, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
{499, DATATYPE_UINT16_T, 0, 0, USHRT_MAX }, /*预留*/
|
||||
};
|
||||
|
||||
|
||||
|
||||
bool_t mw_protocol_modbus_check_param_out_of_range(uint16_t us_address, uint16_t us_value)
|
||||
{
|
||||
if(us_address > MAX_VALID_PARAM_ADDRESS)
|
||||
{
|
||||
return true;
|
||||
}
|
||||
if (DATATYPE_UINT16_T == s_ast_param_range[us_address].datatype)
|
||||
{
|
||||
if ((us_value < s_ast_param_range[us_address].min_value) || (us_value > s_ast_param_range[us_address].max_value))
|
||||
{
|
||||
return true;
|
||||
}
|
||||
}
|
||||
else if (DATATYPE_INT16_T == s_ast_param_range[us_address].datatype)
|
||||
{
|
||||
if (((int16_t)us_value < s_ast_param_range[us_address].min_value) || ((int16_t)us_value > s_ast_param_range[us_address].max_value))
|
||||
{
|
||||
return true;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
uint16_t mw_protocol_modbus_get_param_default_value(uint16_t us_address)
|
||||
{
|
||||
if(us_address > MAX_VALID_PARAM_ADDRESS)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
1114
test/PV_Inverter/dsp/mw_param_manager_dsp_struct.h
Normal file
1114
test/PV_Inverter/dsp/mw_param_manager_dsp_struct.h
Normal file
File diff suppressed because it is too large
Load Diff
BIN
test/PV_Inverter/光伏逆变器2.1_通信地址表_V01.xlsx
Normal file
BIN
test/PV_Inverter/光伏逆变器2.1_通信地址表_V01.xlsx
Normal file
Binary file not shown.
BIN
test/PV_Inverter/光伏逆变器2.1_通信地址表_V33.xlsx
Normal file
BIN
test/PV_Inverter/光伏逆变器2.1_通信地址表_V33.xlsx
Normal file
Binary file not shown.
BIN
test/PV_Inverter/新平台-光伏逆变器2.1_ARM通信地址表_V01.xlsx
Normal file
BIN
test/PV_Inverter/新平台-光伏逆变器2.1_ARM通信地址表_V01.xlsx
Normal file
Binary file not shown.
Reference in New Issue
Block a user