叠光并联适配器:

- 添加报文重发机制;
 - 定义配置执行方案;

.gitignore

@@ -3,3 +3,6 @@
 
 # 缓存文件
 **/__pycache__/*.pyc
+
+# 生成结果
+result/*.bin

source/dev_LaminaAdapter.py

@@ -105,7 +105,8 @@ modbus_map = {
     0x130: ["SN",                         4, 16],
     0x140: ["MES",                        4, 16],
     0x150: ["Datetime",                   4, 16],
-    0x160: ["厂商",                       4, 16],
+    0x160: ["载波芯片地址",               4, 16],
+    0x170: ["厂商",                       4, 16],
 }
 
 
@@ -113,12 +114,32 @@ class LaminaAdapter:
     def __init__(self, com_name="COM16", addr_645=[0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA], addr_modbus=0x01, **kwargs):
         # 初始化串口通信
         if com_name is not None:
-            self.com = Serial(com_name, baudrate=115200, parity='N', timeout=2)
+            com_config = {}
+            if 'baudrate' in kwargs.keys():
+                com_config['baudrate'] = kwargs['baudrate']
+            if 'parity' in kwargs.keys():
+                com_config['parity'] = kwargs['parity']
+            if 'bytesize' in kwargs.keys():
+                com_config['bytesize'] = kwargs['bytesize']
+            if 'stopbits' in kwargs.keys():
+                com_config['stopbits'] = kwargs['stopbits']
+            self.com = Serial(com_name, **com_config)
         else:
             self.com =None
 
         if 'frame_print' in kwargs.keys():
-            self.frame_print = False
+            self.flag_print = True
+
+        if 'time_out' in kwargs.keys():
+            self.time_out = kwargs['time_out']
+        if 'retry' in kwargs.keys():
+            self.retry = kwargs['retry']
+        else:
+            self.retry = 1
+        if 'retry_sub' in kwargs.keys():
+            self.retry_sub = kwargs['retry_sub']
+        else:
+            self.retry_sub = 1
 
         # 设置645协议地址
         self.addr_645 = addr_645
@@ -136,13 +157,30 @@ class LaminaAdapter:
 
     def _transfer_data(self, frame):
         """ 报文数据传输 """
-        self.com.read_all()
+        cnt = 0
-        self.com.write(bytearray(frame))
+        while cnt < self.retry:
-        time.sleep(0.5)
+            self.com.read_all()
-        frame_recv = self.com.read_all()
+            self.com.write(bytearray(frame))
-        output_text = check_frame_dlt645(frame_recv, block=self.block)
+
-        print(output_text)
+            cnt_sub = 0
-        if self.frame_print:
+            frame_recv = None
+            while not frame_recv:
+                time.sleep(self.time_out)
+                frame_recv = self.com.read_all()
+                cnt_sub += 1
+                if cnt_sub >= self.retry_sub:
+                    break
+
+            try:
+                output_text = check_frame_dlt645(frame_recv, block=self.block)
+                cnt += 1
+            except Exception as e:
+                print(e)
+                continue
+            print(output_text)
+            break
+        
+        if hasattr(self, 'frame_print'):
             print(trans_list_to_str(frame))
             print(trans_list_to_str(frame_recv))
 
@@ -204,24 +242,24 @@ class LaminaAdapter:
         frame_master = bytearray(make_frame_dlt645(self.block))
 
         # 等待擦除完成返回
-        try_times = 3000
+        try_times = 30
         self.com.read_all()
         while try_times:
-            time.sleep(0.4)
+            time.sleep(self.time_out)
             self.com.write(frame_master)
             frame_slave = self.com.read_all()
             if not frame_slave:
                 try_times -= 1
                 continue
             
-            self.block["data"]['file_block_size'] = check_frame_dlt645(frame_slave, self.block)
+            _, _, self.block["data"]['file_block_size'] = check_frame_dlt645(frame_slave, self.block)
             break
 
         if self.block["data"]['file_block_size'] == 0:
             raise Exception("Error slave response.")
 
         # 避免接收到延迟返回报文
-        time.sleep(0.4)
+        time.sleep(self.time_out)
 
         # 文件传输
         self.block["data"]['step'] = 'trans'
@@ -229,13 +267,32 @@ class LaminaAdapter:
         while data_remain > 0:
             frame_master = bytearray(make_frame_dlt645(self.block))
 
-            self.com.read_all()
+            cnt = 0
-            self.com.write(frame_master)
+            while cnt < self.retry:
-            time.sleep(0.2)
+                self.com.read_all()
-            frame_slave = None
+                self.com.write(frame_master)
-            while not frame_slave:
+
-                frame_slave = self.com.read_all()
+                cnt_sub = 0
-            check_frame_dlt645(frame_slave, self.block)
+                frame_slave = None
+                while not frame_slave:
+                    time.sleep(self.time_out)
+                    frame_slave = self.com.read_all()
+                    cnt_sub += 1
+                    if cnt_sub >= self.retry_sub:
+                        break
+
+                try:
+                    ret = check_frame_dlt645(frame_slave, self.block)
+                except Exception as e:
+                    print(e)
+                    ret = False, 0, 0
+                if ret[0]:
+                    break
+                else:
+                    cnt += 1
+                
+            if cnt >= self.retry:
+                raise Exception("Error, Retry failed.")
             
             self.block["data"]['index'] += 1
             data_remain -= self.block["data"]['file_block_size']
@@ -244,21 +301,52 @@ class LaminaAdapter:
         self.block["data"]['step'] = 'end'
         frame_master = bytearray(make_frame_dlt645(self.block))
 
-        self.com.read_all()
+        cnt = 0
-        self.com.write(frame_master)
+        while cnt < self.retry:
-        time.sleep(0.1)
+            self.com.read_all()
-        frame_slave = None
+            self.com.write(frame_master)
-        while not frame_slave:
+
-            frame_slave = self.com.read_all()
+            cnt_sub = 0
-        check_frame_dlt645(frame_slave[:20], self.block)
+            frame_slave = None
+            while not frame_slave:
+                time.sleep(self.time_out)
+                frame_slave = self.com.read_all()
+                cnt_sub += 1
+                if cnt_sub >= self.retry_sub:
+                    break
+
+            try:
+                ret = check_frame_dlt645(frame_slave, self.block)
+            except Exception as e:
+                print(e)
+                ret = False, 0, 0
+            if ret[0]:
+                break
+            else:
+                cnt += 1
+
+        if cnt >= self.retry:
+            raise Exception("Error, Retry failed.")
 
 if __name__=='__main__':
-    dev_lamina = LaminaAdapter(com_name="COM8")
+    mode_config = {
+        "Log": {'com_name': None},
+        "Debug": {'com_name': 'COM8', 'baudrate': 115200, 'parity': 'N', 'bytesize': 8, 'stopbits': 1,
+                  'time_out': 0.1},
+        "HPLC":  {'com_name': 'COM5', 'baudrate': 9600, 'parity': 'E', 'bytesize': 8, 'stopbits': 1,
+                  'time_out': 1, 'retry': 10, 'retry_sub': 10},
+    }
 
-    dev_lamina.frame_read(0x0E, 0x14)
+
+    dev_lamina = LaminaAdapter(**mode_config['Debug'])
 
     dev_lamina.frame_read(0x0100, 0x20)
 
+    if 0:
+        dev_lamina.frame_read(0x0E, 0x14)
+    if 0:
+        dev_lamina.frame_read(0x60, 0x60)
+
     if 0:
         dev_lamina.frame_write_str(0x0130, list("SN20240107546"))
         dev_lamina.frame_write_str(0x0140, list("MES20240107546"))
@@ -267,9 +355,13 @@ if __name__=='__main__':
         dev_lamina.frame_read(0x0130, 0x30)
 
     if not hasattr(__builtins__,"__IPYTHON__"):
-        # path_bin = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\SLCP001_240517_1100_T1.10.bin")
+        path_bin = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\lamina_adapter.bin")
         # path_bin = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\SLCP001_240520_0000_T1.11.bin")
-        path_bin = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\SLCP001_240517_1800_V1.11.bin")
+        # path_bin = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\SLCP001_240525_1230_V1.15.bin")
         dev_lamina.frame_update(path_bin)
 
+        time.sleep(6)
+
+        dev_lamina.frame_read(0x0100, 0x20)
+
 

source/func_frame.py

@@ -222,40 +222,22 @@ def check_frame_modbus(frame, block=None):
     code_subfunc = frame[2]
     if code_func == 0x07:
         """ 升级回复帧 """
-        if code_subfunc == 0x01 and frame[3] == 0x00:
+        if frame[3] == 0x00:
-            return frame[6] * 256 + frame[7]
+            check_result = True
+        else:
+            check_result = False
+        update_index = frame[4] * 256 + frame[5]
+        check_hope = 0
+        if code_subfunc == 0x01:
+            """ 处理帧头 """
+            check_hope = frame[6] * 256 + frame[7]
         elif code_subfunc == 0x02:
             """ 解析帧序号及返回值, 不做序列号校验 """
-            update_result = frame[3]
-            update_index = frame[4] * 256 + frame[5]
-            # 检查严重错误标志
-            if update_result == 0xFF:
-                raise Exception("Error, Update abort.")
-            if update_result >= 0xA0 or update_result == 0x0F:
-                check_result = False
-            else:
-                check_result = True
-            if update_result >= 0xA0:
-                update_result -= 0x90
-            if update_result >= 0x20:
-                check_hope = update_index + (update_result & 0x0F)
-            elif update_result >= 0x10:
-                check_hope = update_index - (update_result & 0x0F)
-            else:
-                check_hope = None
-            return check_result, update_index, check_hope
         elif code_subfunc == 0x03:
-            if frame[3] == 0xFF:
+            """ 升级结束 """
-                raise Exception("Update verification failed.")
-            elif frame[3] == 0x01:
-                print("Update done.")
-            elif frame[3] == 0x00:
-                print("Update not done.")
-            else:
-                print("Update unknown return value.")
-            return frame[3]
         else:
             raise Exception("Func code or Return code error.")
+        return check_result, update_index, check_hope
     elif code_func == 0x03 or code_func == 0x04:
         """ 数据读取帧 """
         if frame[2] == len(frame[3:-2]):

source/main.py

@@ -2,7 +2,7 @@ import time
 from webui import webui
 from pathlib import Path
 from func_frame import check_frame_dlt645
-from dev_Lamina import LaminaAdapter
+from source.dev_LaminaAdapter import LaminaAdapter
 from dev_EnergyRouter import EnergyRouter
 
 

source/utl_upgrade.py

@@ -1,6 +1,8 @@
 # 升级包生成脚本
 import hashlib
 from pathlib import Path
+from datetime import datetime
+from crc import Calculator, Crc16
 
 from utl import conv_int_to_array, trans_list_to_str
 
@@ -20,40 +22,63 @@ Header_Tag = {
     'hex_name':       [0xFF, -1, 80],           # 255 - Hex文件名; less than 80byte
 }
 
-def file_IntelHex_to_Bin(file_data, base_address, len_max=0xC000, conv_end=False):
+def file_IntelHex_to_Bin(file_data, base_address=-1, len_max=-1, **kwargs):
     """
         将Intel Hex格式文件转换为Bin格式;
     """
-    result = bytearray(len_max).replace(b'\x00', b'\xff')
+    if base_address == -1:
+        if file_data[8] == '2':
+            base_address = int(file_data[9: 13], 16) * 16
+            offset_begin = 16
+        elif file_data[8] == '4':
+            base_address = int(file_data[9: 13], 16) * 2**16
+            offset_begin = 16
+        else:
+            base_address = 0
+            offset_begin = 0
+        base_address += int(file_data[offset_begin + 3: offset_begin + 7], 16)
+        base_address &= ~0x0FFF
+    if len_max == -1:
+        len_space = 0x10
+    else:
+        len_space = len_max
+    result = bytearray(len_space).replace(b'\x00', b'\xff')
     lines = file_data.split('\n')
     offset = 0
     max_address = 0
     for line in lines:
-        if max_address >= len_max:
-            raise Exception("Bin file Oversize.")
         if line[0] == ':':
             checksum = sum([int(x, 16) * (15 * (~i & 0x01) + 1) for i, x in enumerate(line[1:])])
             if (checksum & 0x00FF) != 0:
                 raise Exception('Hex file checksum error!')
             
             if line[7:9] == '00':
-                len = int(line[1:3], 16)
+                len_line = int(line[1:3], 16)
                 address = offset + int(line[3:7], 16) - base_address
-                address *= 2
                 data = bytearray.fromhex(line[9:-2])
-                if conv_end:
+                if 'conv_end' in kwargs.keys():
-                    for i in range(0, len, 2):
+                    address *= 2
-                        t = data[i]
+                    if kwargs['conv_end']:
-                        data[i] = data[i+1]
+                        for i in range(0, len_line, 2):
-                        data[i+1] = t
+                            t = data[i]
-                result[address:address+len] = data
+                            data[i] = data[i+1]
+                            data[i+1] = t
+
+                if max_address >= len_space:
+                    if len_max == -1:
+                        result += bytearray((len_line & ~0x0F) + 0x10).replace(b'\x00', b'\xff')
+                        len_space += (len_line & ~0x0F) + 0x10
+                    else:
+                        raise Exception("Bin file Oversize.")
+                result[address:address+len_line] = data
+
+                if (address + len_line) > max_address:
+                    max_address = address + len_line
 
-                if (address + len) > max_address:
-                    max_address = address + len
             elif line[7:9] == '01':
                 break
             elif line[7:9] == '02':
-                offset = int(line[9:-2], 16) * 2**16
+                offset = int(line[9:-2], 16) * 16
             elif line[7:9] == '03':
                 pass
             elif line[7:9] == '04':   # 拓展地址偏移
@@ -62,6 +87,7 @@ def file_IntelHex_to_Bin(file_data, base_address, len_max=0xC000, conv_end=False
                 pass
     return result[:max_address]
 
+
 def file_encryption(buffer):
     """ 文件加密算法 """
     pwd_idx = 0
@@ -121,6 +147,74 @@ def build_header_lite(config: dict):
 
     return m_file_header
 
+def build_header_new(config: dict):
+    """
+        基于配置参数, 生成新版文件信息头;
+    """
+    # 定义文件头
+    m_file_header = [0xFF] * 184
+
+    m_file_header[0:8] = list(b"TOPSCOMM")
+    m_file_header[8:10] = config['prod_type']
+    m_file_header[10:22] = config['prog_id'] + [0] * (12 - len(config['prog_id']))
+    if config['method_compress'] == True:
+        m_file_header[22] = 0x01
+    else:
+        m_file_header[22] = 0x00
+
+    if 'crc32' in config.keys():
+        m_file_header[23] = 0x00
+        m_file_header[24: 40] = config['crc32'] + [0x00] * 12
+    elif 'md5' in config.keys():
+        m_file_header[23] = 0x01
+        m_file_header[24: 40] = config['md5']
+    else:
+        raise Exception("Error, Unknown method verify.")
+    
+    # 时间戳生成
+    time_now = datetime.now()
+    time_stamp = list(map(lambda x: int(x), 
+                                     time_now.strftime("%Y-%m-%d-%H-%M").split('-')))
+    time_stamp.insert(1, time_stamp[0] // 0x100)
+    time_stamp[0] = time_stamp[0] % 0x100
+    m_file_header[40: 46] = time_stamp
+
+    m_file_header[46: 50] = config['file_length']
+    # Cpu1
+    m_file_header[50: 54] = [0x00] * 4
+    m_file_header[54: 70] = [0x00] * 16
+    # Cpu2
+    m_file_header[70: 74] = [0x00] * 4
+    m_file_header[74: 90] = [0x00] * 16
+
+    if config['prog_type'] == 'app':
+        m_file_header[90: 92] = [0x00, 0x00]
+    elif config['prog_type'] == 'boot':
+        m_file_header[90: 92] = [0x01, 0x00]
+    elif config['prog_type'] == 'diff':
+        m_file_header[90: 92] = [0x02, 0x00]
+    elif config['prog_type'] == 'font':
+        m_file_header[90: 92] = [0x03, 0x00]
+    elif config['prog_type'] == 'config':
+        m_file_header[90: 92] = [0x04, 0x00]
+    elif config['prog_type'] == 'data':
+        m_file_header[90: 92] = [0x05, 0x00]
+    elif config['prog_type'] == 'test':
+        m_file_header[90: 92] = [0x06, 0x00]
+    else:
+        raise Exception("Error, Unknown Program Type.")
+    
+    m_file_header[92: 94] = config['area_code']
+    m_file_header[94: 158] = config['hex_name']
+    m_file_header[158: 182] = [0x00] * 24
+
+    m_file_header = bytearray(m_file_header)
+
+    calculator = Calculator(Crc16.MODBUS)
+    code_crc16 = calculator.checksum(m_file_header[:-2])
+    m_file_header[182: 184] = [code_crc16 % 0x100, code_crc16 // 0x100]
+
+    return m_file_header
 
 def make_datafile(file_path: str, config: dict, header_len=512):
     """ 升级文件生成函数; 完整文件头, TI-hex转换 """
@@ -174,6 +268,24 @@ def make_datafile2(file_path: str, config: dict, header_len=512):
     data_encrypt = file_encryption(data_bin)
     return data_header, data_bin, data_encrypt
 
+def make_datafile3(file_path: str, config: dict, header_len=184):
+    """ 升级文件生成函数; 完整文件头 """
+    file_path = Path(file_path)
+    file_data = file_path.read_text()
+    data_bin = file_IntelHex_to_Bin(file_data)
+    md5_ctx = hashlib.md5()
+    md5_ctx.update(data_bin)
+    config['file_length'] = conv_int_to_array(len(data_bin))
+    config["md5"] = list(md5_ctx.digest())
+    config['hex_name'] = list(file_path.name.encode())[:64]
+    config['hex_name'] += [0] * (64 - len(config['hex_name']))
+
+    data_header = build_header_new(config)
+    if data_header is None:
+        raise Exception("Header tag oversize. ")
+    data_encrypt = file_encryption(data_bin)
+    return data_header, data_bin, data_encrypt
+
 
 def test1(fp):
     """ bin文件生成测试 """
@@ -186,6 +298,17 @@ def test1(fp):
 
 def test2():
     """ md5校验, 加密测试 """
+    bin_offcial = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\uart_tool\江苏发货版本\SLCP001_240517_1800_V1.11.bin")
+    data_offcial = bin_offcial.read_bytes()
+    byte_data = data_offcial[:182]
+    crc = data_offcial[182:184]
+    # data = "54 4F 50 53 43 4F 4D 4D 45 00 53 4C 43 50 30 30 31 00 00 00 00 00 01 00 B6 61 A8 73 BF 82 9E A7 4C 79 F6 BB 94 E2 A5 18 E8 07 05 18 0B 17 18 4C 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6C 61 6D 69 6E 61 5F 61 64 61 70 74 65 72 5F 6D 61 69 6E 02 00 00 00 00 20 10 53 06 00 00 00 00 80 A5 8F 02 00 00 00 00 EC 1F 40 00 00 00 00 00 00 00 00 00 00 00 00 00 7A CA 61 0A FD 7F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"
+    # byte_data = list(map(lambda x: int(x, 16), data.split(' ')))
+    # crc = "99 CB"
+    calculator = Calculator(Crc16.MODBUS)
+    code_crc16 = calculator.checksum(bytearray(byte_data))
+    print(f"Result = {hex(code_crc16)}, Offcial Result = {crc}")
+
     data_bin = '123456 123456 '.encode()
     md5_ctx = hashlib.md5()
     md5_ctx.update(data_bin)
@@ -229,11 +352,82 @@ def test3(path_bin):
     file2 = path_bin.parent / (path_bin.stem + '_h512.dat')
     file2.write_bytes(header_512 + data_b)
 
+def test4(path_boot, path_main, path_back):
+    """ 叠光适配器新版升级方案测试 """
+    config = {
+        'prod_type':        [0x45, 0x00],       # 产品类型
+        'method_compress':  False,              # 文件压缩
+        'prog_id':          list(b"SLCP001"),   # 程序识别号
+        'prog_type':        'app',              # 程序类型
+        'area_code':        [0x00, 0x00],       # 地区
+    }
+    file_path = Path(path_boot)
+    file_data = file_path.read_text()
+    boot_bin = file_IntelHex_to_Bin(file_data, len_max=0x010000)
+    main_header, main_data_b, main_data_e = make_datafile3(path_main, config)
+    back_header, back_data_b, back_data_e = make_datafile3(path_back, config)
+
+    print("Merge Image generated successfully.")
+    print(f"Main File:")
+    print(f"\t header_length={len(main_header)}, bin_length={len(main_data_b)}[{hex(len(main_data_b))}]")
+    print(f"Back File:")
+    print(f"\t header_length={len(back_header)}, bin_length={len(back_data_b)}[{hex(len(back_data_b))}]")
+
+    # 组装镜像
+    Image = [0xFF] * 0x100000
+    offset_image = 0
+    Image[offset_image: offset_image + len(boot_bin)] = boot_bin
+    offset_image = 0x010000
+    Image[offset_image: offset_image + len(main_data_b)] = main_data_b
+    offset_image = 0x0BC000
+    Image[offset_image: offset_image + len(back_data_b)] = back_data_b
+    offset_image = 0x0FC000
+    Image[offset_image: offset_image + len(main_header)] = main_header
+    offset_image = 0x0FE000
+    Image[offset_image: offset_image + len(back_header)] = back_header
+
+    return bytearray(Image), main_header, main_data_b, main_data_e, back_header, back_data_b, back_data_e
+
 
 if __name__ == "__main__":
-    path_bin = Path("F:\\Work\\FPGA\\Test\\Vivado\\test_update\\test_update.vitis\\upgrade_system\\Debug\\sd_card\\BOOT.BIN")
+    # path_bin = Path("F:\\Work\\FPGA\\Test\\Vivado\\test_update\\test_update.vitis\\upgrade_system\\Debug\\sd_card\\BOOT.BIN")
+    # test3(path_bin)
 
-    # test1()
     # test2()
-    test3(path_bin)
+
-    pass
+    if 0:
+        bin_back = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\lamina_adapter_back.bin")
+        bin_main = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\upgrade\lamina_adapter_main.bin")
+        main_header1 = bin_main.read_bytes()[:184]
+        main_data_e1 = bin_main.read_bytes()[184:]
+        back_header1 = bin_back.read_bytes()[:184]
+        back_data_e1 = bin_back.read_bytes()[184:]
+
+    root = Path(r"D:\WorkingProject\LightStackAdapter\software\lamina_adapter\tools\uart_tool")
+    result = Path('result')
+    # 正常启动镜像
+    file_image = result / 'SLCP001_MEM.bin'
+    hex_boot = root / r"生产版本\bootloader.hex"
+    hex_main = root / r"生产版本\SLCP001_240525_1800_V1.12.hex"
+    hex_back = root / r"生产版本\SLCP001_240525_1800_B1.12.hex"
+    data_bins = test4(hex_boot, hex_main, hex_back)
+    file_image.write_bytes(data_bins[0].copy())
+
+    # 异常镜像-主分区md5错误
+    file_image = result / 'SLCP001_MEM_b1.bin'
+    data_image = data_bins[0].copy()
+    data_image[0x0FC018: 0x0FC01A] = [0x00, 0x01]
+    file_image.write_bytes(data_image)
+
+    # 异常镜像-备份分区md5错误
+    file_image = result / 'SLCP001_MEM_b2.bin'
+    data_image = data_bins[0].copy()
+    data_image[0x0FE018: 0x0FE01A] = [0x00, 0x01]
+    file_image.write_bytes(data_image)
+
+    # 异常镜像-双分区md5错误
+    file_image = result / 'SLCP001_MEM_b3.bin'
+    data_image = data_bins[0].copy()
+    data_image[0x0FC018: 0x0FC01A] = [0x00, 0x01]
+    data_image[0x0FE018: 0x0FE01A] = [0x00, 0x01]
+    file_image.write_bytes(data_image)