linghtiin/DebugTool
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

重构叠光控制器脚本文件;

Browse Source
This commit is contained in:
何 泽隆
2024-10-04 21:20:49 +08:00
parent b3835de75a
commit 8fa7c8f40b
1 changed files with 215 additions and 267 deletions
Download Patch File Download Diff File Expand all files Collapse all files

482
source/dev_LaminaController.py
View File

@@ -1,10 +1,13 @@
import time
from math import ceil
from tqdm import tqdm
from pathlib import Path
from serial import Serial
from datetime import datetime
from tenacity import retry, stop_after_attempt, wait_fixed
from tools.ByteConv import trans_list_to_str
from tools.IntelHex import file_Bin_to_IntelHex
from func_frame import make_frame_modbus, check_frame_modbus
from func_frame_re import make_frame_modbus, check_frame_modbus, print_display
from func_upgrade import GenerateImage_DLSP001_p280039, GeneratePackage_DLSP001_p280039
modbus_map = {
@@ -14,6 +17,7 @@ modbus_map = {
# 4 - str
# 5 - addr
# 6 - float
# 7 - numberList
0x0B: ["事件标志", 1],
0x0C: ["告警字1", 1],
0x0D: ["告警字2", 1],
@@ -23,24 +27,24 @@ modbus_map = {
0x11: ["Boost1工作状态" , 1],
0x12: ["Boost2工作状态" , 1],
0x13: ["开关机状态" , 1],
0x14: ["光伏组串1输入电压" , 2],
0x15: ["光伏组串2输入电压" , 2],
0x16: ["Boost1电感电流" , 2],
0x17: ["Boost2电感电流" , 2],
0x18: ["Boost输出电压" , 2],
0x19: ["Boost输出总电流" , 2],
0x1A: ["Boost1功率" , 3],
0x1C: ["Boost2功率" , 3],
0x1E: ["输入总功率" , 3],
0x20: ["LLC输出电压" , 2],
0x21: ["端口输出电压" , 2],
0x22: ["LLC输出电流均值" , 2],
0x23: ["LLC输出电流峰值" , 2],
0x24: ["绝缘检测电压" , 2],
0x25: ["散热片温度" , 2],
0x26: ["腔体1温度" , 2],
0x27: ["腔体2温度" , 2],
0x28: ["设备温度" , 2],
0x14: ["光伏组串1输入电压" , 2, 10],
0x15: ["光伏组串2输入电压" , 2, 10],
0x16: ["Boost1电感电流" , 2, 100],
0x17: ["Boost2电感电流" , 2, 100],
0x18: ["Boost输出电压" , 2, 10],
0x19: ["Boost输出总电流" , 2, 100],
0x1A: ["Boost1功率" , 3, 1000],
0x1C: ["Boost2功率" , 3, 1000],
0x1E: ["输入总功率" , 3, 1000],
0x20: ["LLC输出电压" , 2, 10],
0x21: ["端口输出电压" , 2, 10],
0x22: ["LLC输出电流均值" , 2, 100],
0x23: ["LLC输出电流峰值" , 2, 100],
0x24: ["绝缘检测电压" , 2, 10],
0x25: ["散热片温度" , 2, 10],
0x26: ["腔体1温度" , 2, 10],
0x27: ["腔体2温度" , 2, 10],
0x28: ["设备温度" , 2, 10],
0x50: ["启停控制命令" , 2],
0x51: ["故障清除命令" , 2],
@@ -52,44 +56,44 @@ modbus_map = {
0x57: ["时间配置命令" , 7, 3],
0x60: ["整机运行使能", 1],
0x61: ["最小启动允许输入电压", 2],
0x62: ["最大启动允许输入电压", 2],
0x63: ["最小停机输入电压", 2],
0x64: ["最大停机输入电压", 2],
0x65: ["最小启动允许输出电压", 2],
0x66: ["最大启动允许输出电压", 2],
0x67: ["最小停止允许输出电压", 2],
0x68: ["最大停止允许输出电压", 2],
0x69: ["最小MPPT电流限值", 2],
0x6A: ["最大MPPT电流限值", 2],
0x61: ["最小启动允许输入电压", 2, 10],
0x62: ["最大启动允许输入电压", 2, 10],
0x63: ["最小停机输入电压", 2, 10],
0x64: ["最大停机输入电压", 2, 10],
0x65: ["最小启动允许输出电压", 2, 10],
0x66: ["最大启动允许输出电压", 2, 10],
0x67: ["最小停止允许输出电压", 2, 10],
0x68: ["最大停止允许输出电压", 2, 10],
0x69: ["最小MPPT电流限值", 2, 100],
0x6A: ["最大MPPT电流限值", 2, 100],
0x6B: ["保留数据项", 2],
0x6C: ["最大功率限值", 3],
0x6E: ["最大功率限值存储值", 3],
0x70: ["Boost输入过压保护值", 2],
0x71: ["Boost输出过压保护值", 2],
0x72: ["LLC输出过压保护值", 2],
0x73: ["LLC输出欠压保护值", 2],
0x74: ["Boost电感过流保护值", 2],
0x75: ["LLC输出电流均值保护值", 2],
0x76: ["LLC输出电流峰值保护值", 2],
0x6C: ["最大功率限值", 3, 1000],
0x6E: ["最大功率限值存储值", 3, 1000],
0x70: ["Boost输入过压保护值", 2, 10],
0x71: ["Boost输出过压保护值", 2, 10],
0x72: ["LLC输出过压保护值", 2, 10],
0x73: ["LLC输出欠压保护值", 2, 10],
0x74: ["Boost电感过流保护值", 2, 100],
0x75: ["LLC输出电流均值保护值", 2, 100],
0x76: ["LLC输出电流峰值保护值", 2, 100],
0x77: ["保留数据项", 2],
0x78: ["过载保护值", 3],
0x7A: ["过温故障值", 2],
0x7B: ["过温告警值", 2],
0x7C: ["过温恢复值", 2],
0x7D: ["输出继电器故障判断差值", 2],
0x7E: ["LLC输出电压给定值", 2],
0x7F: ["Boost输出电压给定值", 2],
0x80: ["三点法中间阈值", 2],
0x81: ["浮充电压", 2],
0x82: ["恒压充电电压", 2],
0x83: ["llc软起开始电压", 2],
0x84: ["boost开始运行电压", 2],
0x85: ["boost停止运行电压", 2],
0x78: ["过载保护值", 3, 1000],
0x7A: ["过温故障值", 2, 10],
0x7B: ["过温告警值", 2, 10],
0x7C: ["过温恢复值", 2, 10],
0x7D: ["输出继电器故障判断差值", 2, 10],
0x7E: ["LLC输出电压给定值", 2, 10],
0x7F: ["Boost输出电压给定值", 2, 10],
0x80: ["三点法中间阈值", 2, 10],
0x81: ["浮充电压", 2, 10],
0x82: ["恒压充电电压", 2, 10],
0x83: ["llc软起开始电压", 2, 10],
0x84: ["boost开始运行电压", 2, 10],
0x85: ["boost停止运行电压", 2, 10],
0x86: ["绝缘检测正阻抗限值", 3],
0x88: ["绝缘检测负阻抗限值", 3],
0x8A: ["保留地址项", 2],
0x8B: ["保留地址项", 2],
0x8A: ["抖动频率下限", 2, 10],
0x8B: ["抖动频率上限", 2, 10],
0x8C: ["保留地址项", 2],
0x8D: ["保留地址项", 2],
0x8E: ["保留地址项", 2],
@@ -118,14 +122,14 @@ class LaminaController:
com_config['parity'] = kwargs['parity'] if 'parity' in kwargs.keys() else 'N'
com_config['bytesize'] = kwargs['bytesize'] if 'bytesize' in kwargs.keys() else 8
com_config['stopbits'] = kwargs['stopbits'] if 'stopbits' in kwargs.keys() else 1
self.__com = Serial(com_name, **com_config)
self.__com = Serial(com_name, timeout=0, **com_config)
else:
self.__com =None
self.__com = None
self.flag_print = 'frame_print' in kwargs.keys()
self.time_out = kwargs['time_out'] if 'time_out' in kwargs.keys() else 1
self.time_gap = kwargs['time_gap'] if 'time_gap' in kwargs.keys() else 0.01
self.retry = kwargs['retry'] if 'retry' in kwargs.keys() else 1
self.retry_sub = kwargs['retry_sub'] if 'retry_sub' in kwargs.keys() else 1
self.block = {
'addr' : addr_645,
@@ -135,44 +139,75 @@ class LaminaController:
'data_define': modbus_map,
},
}
self.output = {
'result': False,
'code_func': 0x00,
}
self.log = {
'send': 0,
'read': 0,
'keep-fail': 0,
'record': {
'config': None,
'data': None,
},
}
def __transfer_data(self, frame):
""" 报文数据传输 """
def __read_frame(self) -> bool:
""" 使用帧字节超时策略读报文帧, 并进行解析数据, 打印异常 """
frame_recv = b''
time_start, time_current, flag_frame = time.time(), time.time(), False
while (time_current - time_start) < self.time_out:
time.sleep(self.time_gap)
bytes_read = self.__com.read_all()
time_current = time.time()
if flag_frame and len(bytes_read) == 0:
break
elif len(bytes_read):
flag_frame = True
frame_recv += bytes_read
try:
self.output = check_frame_modbus(frame_recv, self.block['data'])
if self.flag_print:
print("Read Frame: ", trans_list_to_str(frame_recv))
except Exception as ex:
print("Error Info: ", ex)
if self.flag_print and frame_recv:
print("Fail Data: " , trans_list_to_str(frame_recv))
self.output['result'] = False
return self.output['result']
def __transfer_data(self, frame: bytes) -> bool:
""" 串口收发报文, 包含重试逻辑与数据打印 """
if self.__com is None:
print(trans_list_to_str(frame))
return False
cnt = 0
while cnt < self.retry:
self.__com.read_all()
self.__com.write(bytearray(frame))
fail_count = 0
while fail_count < self.retry:
frame_discard = self.__com.read_all()
self.__com.write(frame)
self.log['send'] += 1
cnt_sub = 0
frame_recv = None
while not frame_recv:
time.sleep(self.time_out)
frame_recv = self.__com.read_all()
cnt_sub += 1
if cnt_sub >= self.retry_sub:
break
if self.flag_print and frame_discard:
print("Discard Data: " , frame_discard)
if self.flag_print:
print("Send Frame: ", trans_list_to_str(frame))
try:
output_text = check_frame_modbus(frame_recv, self.block['data'])
except Exception as e:
print(e)
cnt += 1
continue
print(output_text)
break
if self.__read_frame():
if 'Regs' in self.output.keys():
print_display(self.output['Regs'])
self.log['read'] += 1
break
else:
fail_count += 1
if fail_count >= self.log['keep-fail']:
self.log['keep-fail'] = fail_count
time.sleep(2*self.time_out)
if self.flag_print:
print(trans_list_to_str(frame))
print(trans_list_to_str(frame_recv))
return fail_count < self.retry
return cnt < self.retry
def frame_read(self, daddr=0x60, dlen=0x30):
def frame_read(self, daddr=0x60, dlen=0x30) -> bool:
self.block['data']['type'] = 'read'
self.block['data']['data_addr'] = daddr
self.block['data']['data_len'] = dlen
@@ -180,23 +215,25 @@ class LaminaController:
return self.__transfer_data(frame)
def frame_write_one(self, daddr=0x85, dval=-900):
def frame_write_one(self, daddr=0x85, dval=-900) -> bool:
self.block['data']['type'] = 'write_one'
self.block['data']['data_addr'] = daddr
self.block['data']['data_val'] = dval
item_coff = self.block['data']['data_define'][daddr][2] if len(self.block['data']['data_define'][daddr]) > 2 else 1
self.block['data']['data_val'] = int(dval * item_coff)
frame = make_frame_modbus(self.block['data'])
return self.__transfer_data(frame)
def frame_write_dual(self, daddr=0x91, dval=600):
def frame_write_dual(self, daddr=0x91, dval=600) -> bool:
self.block['data']['type'] = 'write_dual'
self.block['data']['data_addr'] = daddr
self.block['data']['data_val'] = dval
item_coff = self.block['data']['data_define'][daddr][2] if len(self.block['data']['data_define'][daddr]) > 2 else 1
self.block['data']['data_val'] = int(dval * item_coff)
frame = make_frame_modbus(self.block['data'])
return self.__transfer_data(frame)
def frame_write_str(self, daddr=0x82, dval=[0x06, 0x05, 0x04, 0x03, 0x02, 0x01]):
def frame_write_str(self, daddr=0x82, dval=[0x06, 0x05, 0x04, 0x03, 0x02, 0x01]) -> bool:
self.block['data']['type'] = 'write_str'
self.block['data']['data_addr'] = daddr
self.block['data']['data_val'] = dval
@@ -204,7 +241,7 @@ class LaminaController:
return self.__transfer_data(frame)
def frame_record(self):
def frame_record(self) -> bool:
""" 读取录波数据
"""
self.block['data']['file_block_size'] = 240
@@ -213,78 +250,41 @@ class LaminaController:
self.block['data']['step'] = 'start'
frame_master = make_frame_modbus(self.block['data'])
ret, cnt, cnt_sub = True, 0, 0
ret, pbar = True, None
frame_data_cfg = []
while ret:
self.__com.read_all()
self.__com.write(frame_master)
frame_slave = None
while not frame_slave:
time.sleep(0.1)
frame_slave = self.__com.read_all()
cnt_sub += 1
if cnt_sub >= self.retry_sub:
break
try:
ret, *block_cfg = check_frame_modbus(frame_slave, self.block['data'])
print(f"{trans_list_to_str(frame_slave[:9])}")
except Exception as ex:
print(ex)
cnt += 1
ret = False
if ret:
cnt = 0
frame_data_cfg.append(block_cfg[0])
if block_cfg[0]['seq'] == 0:
if ret := self.__transfer_data(frame_master):
frame_data_cfg.append(self.output['record'])
if self.output['record']['seq'] == 0:
pbar = tqdm(total=self.output['record']['total'], desc="Record Config Reading")
self.block['data']['step'] = 'next'
frame_master = make_frame_modbus(self.block['data'])
elif (block_cfg[0]['seq']) >= block_cfg[0]['total']:
elif (self.output['record']['seq']) >= self.output['record']['total']:
ret = False
elif cnt < self.retry:
ret = True
pbar and pbar.update()
pbar and pbar.close()
# 读取data
self.block['data']['type'] = 'record_data'
self.block['data']['step'] = 'start'
frame_master = make_frame_modbus(self.block['data'])
ret, cnt, cnt_sub = True, 0, 0
ret, pbar = True, None
frame_data_record = []
while ret:
self.__com.read_all()
self.__com.write(frame_master)
time.sleep(0.3)
frame_slave = None
while not frame_slave:
time.sleep(0.1)
frame_slave = self.__com.read_all()
cnt_sub += 1
if cnt_sub >= self.retry_sub:
break
try:
ret, *block_record = check_frame_modbus(frame_slave, self.block['data'])
print(f"{trans_list_to_str(frame_slave[:9])}")
except Exception as ex:
print(ex)
cnt += 1
ret = False
if ret:
cnt = 0
frame_data_record.append(block_record[0])
if block_record[0]['seq'] == 0:
if ret := self.__transfer_data(frame_master):
frame_data_record.append(self.output['record'])
if self.output['record']['seq'] == 0:
pbar = tqdm(total=self.output['record']['total'], desc="Record Data Reading")
self.block['data']['step'] = 'next'
frame_master = make_frame_modbus(self.block['data'])
elif (block_record[0]['seq']) >= block_record[0]['total']:
elif (self.output['record']['seq']) >= self.output['record']['total']:
ret = False
elif cnt < self.retry:
ret = True
pbar and pbar.update()
pbar and pbar.close()
if len(frame_data_record) == 0:
raise Exception("未取得录波数据.")
print("Operation_Record: 未取得录波数据.")
return False
# 处理配置信息
data_cfg_bare = b"".join([x['data'] for x in frame_data_cfg])
@@ -377,6 +377,9 @@ class LaminaController:
(data_cfg_bare[pos+13] * 0x100 + data_cfg_bare[pos+12]) * 0.001,
}
config_record['TriggerTime'] = time_stamp
self.log['record']['config'] = config_record
self.log['record']['bare_config'] = data_cfg_bare
# 处理录波数据
data_record_bare = b"".join([x['data'] for x in frame_data_record])
data_record = []
@@ -407,156 +410,102 @@ class LaminaController:
pos += 2
data_record.append(record_point)
return config_record, data_record
self.log['record']['data'] = data_record
self.log['record']['bare_data'] = data_record_bare
return True
def frame_update(self, path_bin):
def frame_update(self, path_bin: Path, makefile: bool = False) -> bool:
""" 程序升级
注意: 在使用单板升级测试时, 需要关闭低电压检测功能, 否则无法启动升级流程;
"""
if makefile:
self.block['data']['file'], file_bin = GeneratePackage_DLSP001_p280039(path_bin)
else:
self.block['data']['file'] = path_bin.read_bytes()
self.block['data']['header_offset'] = 184
self.block['data']['type'] = 'update'
param_saved = self.flag_print, self.retry, self.time_out
self.retry = 5
self.time_out = 0.5
self.flag_print = False
# 启动帧
self.block['data']['step'] = 'start'
self.block['data']['index'] = 0
self.block['data']['file'] = Path(path_bin).read_bytes()
self.block['data']['header_offset'] = 184
# 启动帧
frame_master = bytearray(make_frame_modbus(self.block['data']))
# 等待擦除完成返回
try_times = 30
self.__com.read_all()
while try_times:
time.sleep(self.time_out)
self.__com.write(frame_master)
frame_slave = self.__com.read_all()
if not frame_slave:
try_times -= 1
continue
try:
ret, _, self.block["data"]['file_block_size'] = check_frame_modbus(frame_slave, self.block['data'])
break
except Exception as e:
print(e)
if self.block["data"]['file_block_size'] == 0:
raise Exception("Error slave response.")
frame_master = make_frame_modbus(self.block['data'])
if not self.__transfer_data(frame_master):
self.flag_print, self.retry, self.time_out = param_saved
print('Upgrade Fail: start')
return False
self.block["data"]['file_block_size'] = self.output['upgrade']['length']
# 避免接收到延迟返回报文
time.sleep(self.time_out)
# 文件传输
self.retry = 3
self.time_out = 1.5
self.block["data"]['step'] = 'trans'
data_remain = len(self.block["data"]['file']) - self.block['data']['header_offset']
while data_remain > 0:
frame_master = bytearray(make_frame_modbus(self.block['data']))
cnt = 0
while cnt < self.retry:
self.__com.read_all()
self.__com.write(frame_master)
cnt_sub = 0
frame_slave = None
while not frame_slave:
time.sleep(self.time_out)
frame_slave = self.__com.read_all()
cnt_sub += 1
if cnt_sub >= self.retry_sub:
break
try:
ret = check_frame_modbus(frame_slave, self.block['data'])
except Exception as e:
print(e)
ret = False, 0, 0
if ret[0]:
break
else:
cnt += 1
if cnt >= self.retry:
raise Exception("Error, Retry failed.")
self.block["data"]['index'] += 1
data_remain -= self.block["data"]['file_block_size']
self.block['data']['index'] = 0
frame_total = ceil((len(self.block["data"]['file']) - self.block['data']['header_offset']) / self.block["data"]['file_block_size'])
for idx in tqdm(range(frame_total), desc="File Transmitting"):
self.block["data"]['index'] = idx
frame_master = make_frame_modbus(self.block['data'])
if not self.__transfer_data(frame_master):
self.flag_print, self.retry, self.time_out = param_saved
print(f'Upgrade Fail: trans data in {idx}')
return False
# 结束升级
self.time_out = 1
self.block["data"]['step'] = 'end'
frame_master = bytearray(make_frame_modbus(self.block['data']))
self.block["data"]['index'] += 1
frame_master = make_frame_modbus(self.block['data'])
if not self.__transfer_data(frame_master):
self.flag_print, self.retry, self.time_out = param_saved
print(f'Upgrade Fail: end')
return False
cnt = 0
while cnt < self.retry:
self.__com.read_all()
self.__com.write(frame_master)
cnt_sub = 0
frame_slave = None
while not frame_slave:
time.sleep(self.time_out)
frame_slave = self.__com.read_all()
cnt_sub += 1
if cnt_sub >= self.retry_sub:
break
try:
ret = check_frame_modbus(frame_slave, self.block['data'])
except Exception as e:
print(e)
ret = False, 0, 0
if ret[0]:
break
else:
cnt += 1
if cnt >= self.retry:
raise Exception("Error, Retry failed.")
self.flag_print, self.retry, self.time_out = param_saved
return True
def test_communication(time_out=2):
""" 通信成功率测试 """
log_success = 0
log_failed = 0
log_failedseries = 0
cnt_failedseries = 0
time_start = time.time()
saveconfig_print = dev_lamina.flag_print
param_saved = dev_lamina.flag_print, dev_lamina.retry, dev_lamina.time_out
dev_lamina.flag_print = False
dev_lamina.retry = 1
try:
while 1:
if dev_lamina.frame_read(0x0C, 0x20):
log_success += 1
cnt_failedseries = 0
else:
log_failed += 1
cnt_failedseries += 1
if log_failedseries <= cnt_failedseries:
log_failedseries = cnt_failedseries
while True:
dev_lamina.frame_read(0x0C, 0x20)
print(f"Time Stamp: {time.ctime()}")
print(f"Success Frame: {log_success}")
print(f"Failed Frame: {log_failed}")
print(f"Max Series Failed Frame: {log_failedseries}")
print(f"Success Frame: {dev_lamina.log['read']}")
print(f"Failed Frame: {dev_lamina.log['send'] - dev_lamina.log['read']}")
print(f"Max Series Failed Frame: {dev_lamina.log['keep-fail']}")
time.sleep(time_out)
finally:
time_end = time.time()
print("Test Result: ")
print(f"Time Start: {time.strftime(r'%Y-%m-%d %H:%M:%S', time.localtime(time_start))}, \tTime End: {time.strftime(r'%Y-%m-%d %H:%M:%S', time.localtime(time_end))}")
print(f"Time Elapsed: {time_end - time_start}")
print(f"Success Rate: {log_success / (log_success + log_failed) * 100}%")
dev_lamina.flag_print = saveconfig_print
print(f"Success Rate: {dev_lamina.log['read'] / dev_lamina.log['send'] * 100}%")
dev_lamina.flag_print, dev_lamina.retry, dev_lamina.time_out = param_saved
def test_record(path_CFG=None, path_data=None):
""" 执行录波数据读取流程 """
if path_CFG is None: path_CFG = Path(r"D:\WorkSpace\UserTool\SelfTool\FrameParser\test\p280039\record") / f"record_{'-'.join(time.ctime().replace(':', '').split(' '))}.cfg"
if path_data is None: path_data = Path(r"D:\WorkSpace\UserTool\SelfTool\FrameParser\test\p280039\record") / f"record_{'-'.join(time.ctime().replace(':', '').split(' '))}.dat"
config, data = dev_lamina.frame_record()
if not dev_lamina.frame_record():
return
config = dev_lamina.log['record']['config']
data = dev_lamina.log['record']['data']
# Header File
# Config File
# Header File
# Config File
text_cfg = ""
text_cfg += f"LaminaController,1,{config['Standard']}\r\n"
text_cfg += f"{config['ChannelNum']},{config['ChNum_Alg']}A,{config['ChNum_Dgt']}D\r\n"
@@ -593,6 +542,9 @@ def test_record(path_CFG=None, path_data=None):
text_record += line_record + "\r\n"
path_data.write_text(text_record)
print(f"Saved Path:")
print(f"\tconfig: {path_CFG}")
print(f"\tdata: {path_data}")
def make_Image():
""" 叠光控制器DSP镜像与升级包生成流程 """
@@ -638,7 +590,6 @@ def make_Image():
data_hex = file_Bin_to_IntelHex(data_image, 0x80000, memory_width=2)
file_image3.write_text(data_hex)
def make_Pakeage(fp: Path):
""" 生成升级包 """
@@ -743,12 +694,14 @@ if __name__=='__main__':
"Debug": {'com_name': 'COM3', 'baudrate': 115200, 'parity': 'N', 'bytesize': 8, 'stopbits': 1,
# 'addr_645': [0x01, 0x02, 0x03, 0x04, 0x05, 0x06],
'frame_print': True,
'time_out': 0.2, 'retry': 3, 'retry_sub': 10},
'time_out': 0.5, 'retry': 3},
}
dev_lamina = LaminaController(**mode_config['Debug'])
dev_lamina.frame_read(0x0100, 0x20)
# dev_lamina.frame_read(0x0A, 0x20)
# dev_lamina.frame_read(0x60, 0x60)
if not hasattr(__builtins__,"__IPYTHON__") and 0: #
@@ -770,15 +723,10 @@ if __name__=='__main__':
file_package = make_Pakeage(file_hex)
dev_lamina.frame_write_one(0x60, 0)
time.sleep(1)
dev_lamina.frame_update(file_package)
time.sleep(6)
dev_lamina.frame_read(0x0100, 0x20)
# dev_lamina.frame_write_one(0x52, 0x01)
if dev_lamina.frame_update(file_package):
time.sleep(6)
dev_lamina.frame_read(0x0100, 0x20)
# dev_lamina.frame_write_one(0x52, 0x01)